-
Very Active Member
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Active Member
Originally Posted by donhy
Spacing washers and heat shields dont come with a kit. Everything is plug and play and easy to do unless you are OCD like me and try to align everythinf perfectly than you just have to play with washers till you get it right. Yes there is a three wire connector right beside fog light housing.
I forgot about the driver for the LED's, I took a look at the light kit this morning and that turned on the bulb between my ears. I'll do some voltage testing while doing the installation of the plug and play setup and see if I can figure out how to keep the DRL's on with both the high beam and low beam lights.
-
Active Member
Originally Posted by donhy
Spacing washers and heat shields dont come with a kit. Everything is plug and play and easy to do unless you are OCD like me and try to align everythinf perfectly than you just have to play with washers till you get it right. Yes there is a three wire connector right beside fog light housing.
I spaced mine out like yours and it seems the mounting plate might be forcing out the side panel slightly..... In any event I forgot to order the the heat shields so I got creative and took a 2.5" holesaw to the blankoff plate along with a little grinding and it worked really well, and thenl I broke off the mounting tab on the second plate I was modifying, with that I just ordered two heat shields and when they are delivered I'll check and see if the mounting plate is rubbing against the side panel.
Thanks for your install tips Donhy it helped make the job easier and better looking
-
Active Member
I just in stalled the ******* arc lights and was also surprised and disappointed about the gap around the lights. Otherwise a well-engineered kit. Guess i’ll Get over it.
-
Very Active Member
I made spacers out of thick wall plastic tubing. They are 3/4" long and fit into the 3 recesses that the mounting bolts use. The result is the lights are moved forward enough that any gap is negligible. I even ordered a pair of heat shields and a doubt I will use them.
If anyone is interested in the O.D. of that tubing, I'll post it.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Very Active Member
Arc fog lights look like a horse eye...
horae eye1.jpg
-
Very Active Member
2018 F3 S, BRP SS Grill, Spoiler, Attitude Bars, #1 linkage kit, Chopped R Fender, TBR S1R slip On exhaust, Elka Stage 2 R Shock, Shad saddlebags
-
For those of you that have the Arc LEDs and don't like the gap is that with or without the BRP heatshields?20190601_233454.jpg
2019 F3-S SE6
Elka Stage 2 Front and Rear w/HYD
Can-am Dragbar
F4 Custom 28" Windscreen
GTR Lighting LED Headlights
Arc Led Auxiliary lights
Signature Light
BajaRon Swaybar
Akrapovic Sinister Silencer
FOBO 2 Trike TPMS
Motorcycle Dave Gel inserts Rider and Passenger
Foam Grips
-
Active Member
I got the arc lights they seem to work really nice. And I definitely put a statement on the bike with the daytime running lights.
"Friend to those who have no friends. Enemy to those who need no enemies. Headache to those who have no aspirin."~ The Phantom Texter
2019 F3 s , Neutrino Aurora Accessory Fuse Block Blue
-
Very Active Member
Nice video SgtRay. Nice cases. What brand are the seats? They look to be real comfy.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Active Member
Originally Posted by RICZ
Nice video SgtRay. Nice cases. What brand are the seats? They look to be real comfy.
They are the ones in the can am site on the store page.
"Friend to those who have no friends. Enemy to those who need no enemies. Headache to those who have no aspirin."~ The Phantom Texter
2019 F3 s , Neutrino Aurora Accessory Fuse Block Blue
-
Very Active Member
Anyone wanting a pair of F3 fog light heat shields, I find I don't need mine. Moving the lights forward doesn't leave any blank spaces.
$20 to my PayPal and they are yours, including shipping. PM me.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|