Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Apr 2019
    Location
    MO
    Posts
    2
    Spyder Garage
    0

    Default Digital Main Screen Temp Gauge

    2014 RT-SE6, I installed a ProSport EVO Series digital fuel level gauge in the empty left side gauge opening. Main screen used to show digital water temp (left side) and digital fuel level (right side). Fuel level is gone (which I expected with the install of the gauge), but the water temp is also gone. Circular digital tachometer w/needle now displays next to the speedometer. Any way to restore just the water temp indicator on the main screen?

  2. #2
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    No, (I don't think so) what you now have is the standard visuals, the analog gauges shorted the digital readouts and required both analogs to work.

    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  3. #3
    Very Active Member IdahoMtnSpyder's Avatar
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    9,775
    Spyder Garage
    1

    Default

    Quote Originally Posted by rwk1129 View Post
    2014 RT-SE6, I installed a ProSport EVO Series digital fuel level gauge in the empty left side gauge opening. Main screen used to show digital water temp (left side) and digital fuel level (right side). Fuel level is gone (which I expected with the install of the gauge), but the water temp is also gone. Circular digital tachometer w/needle now displays next to the speedometer. Any way to restore just the water temp indicator on the main screen?
    Nope. As Joe says.

    You choice is either 1) have both gauges connected to the original analog gauge wires, or 2) no gauges connected to the original analog gauge wires. It's an either/or situation, cluster digital or both analog (or substitute digital like you have). You can't one of each. If you really like the ProSport you'll have to buy a like temperature gauge.

    2014 Copper RTS

    Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
    2014 RTS , Copper! (officially Cognac)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •