-
Very Active Member
Temperature read out error
Is there any way to correct the temperature readout setting? Mine indicates about 5-7 degrees higher than actual temperatures. I guess I could just look at it and subtract 5 degrees but it would be nice if it told me the truth..... Jim
2005 Windveil Blue Premium Mustang Convertible
2008 Honda GL1800/California Sidecar Trike, SOLD
2014 Platinum Silver Satin Spyder RTL, SOLD
Semper Fi
-
Very Active Member
I also have a 14 RT …. and it isn't accurate either ….. the sensor isn't in a great location for accuracy ….. Mike
-
Ozzie Ozzie Ozzie
That sensor isn't necessarily telling you what the ambient temp is, like a weather report might - due to the sensor location, it's more aimed at telling you what the 'under-tupperware' temp is, ie, the temp of the air being delivered to the engine.... When that hits 100° or higher if you've just made a short stop or been idling along in slow moving traffic, don't be surprised if you see a 'high temp warning' or even a 'limp home mode' due to the over-heating; but it'll often go away once the fans start up or you begin to get a bit of air-flow thru the tupperware!
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Active Member
BRP has made Zero improvements on their sensors over the years. My 2018 has readings between 5 and 10 degrees above the actual temp. every ride. And let's not talk about the horrible readings when stopped for any amount of time. Why bother putting a gauge on the Spyder if it's going to give you inaccurate readings. These vehicles aren't cheap, but some of their designs sure are.
GLIDE-ON>>>>>>>>>>>>>>
"Blue Belle" 2021 RTL Chrome in Petrol Blue
-
Very Active Member
Where is it located on a RT?
Never mind I found it.
-
Active Member
What really pissed me off is on a $30,000 vehicle they can not put a clock that stays accurate. Please a $8.00 watch at Wal-Mart keeps accurate time.
-
Very Active Member
See post #3
Pete explains it for you. The location is usually low and close to the air intake picking up the heat off the asphalt as well. The clock is a whole different story. As for the true temp you have it on your phone or get a stick on and your good. You have engine temp which is the one you should worry about the other does give you a reference give or take those 5-10 degrees...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
Pretty certain you will find the engine has an ambient temp and pressure sensor. That is the reference for the engine intake air. Not sure if the computer compares both, but the engine sure runs better when the temps are OAT are lower.
-
Very Active Member
-
Very Active Member
Originally Posted by canamjhb
Is there any way to correct the temperature readout setting? Mine indicates about 5-7 degrees higher than actual temperatures. I guess I could just look at it and subtract 5 degrees but it would be nice if it told me the truth..... Jim
Jim - As you have correctly noticed, the display temp is right at 6-7 degrees high to the outside ambient temperature. The good news is it is quite accurate as we also see the 7 degree higher temps on our 15 RT and 16 F3T, so apparently the location and accuracy of the gauges carries from one Spyder to another... just have to subtract the 7 degrees to get the outside air temp (while moving down the road of course)
07 Shadows, Aero, Spirit gone but not forgotten
03 Harley Sportster, 07 RK moved on
11 RT- 76,000 mi, 15 RT-S- 44,000 mi, traded for current 15 base RT and 16 F3T
-
Very Active Member
It's a combination temperature and ambient air pressure sensor located at the top side of the right air tunnel in the front module. I cut a bigger hole in top of the tunnel for mine. That helped quite a bit. As it is air skims past the bottom part of the sensor and not over it. By cutting the hole bigger I got more air to circulate around the sensor. You don't want to do anything that will cause air to move too hard against the sensor because then it'll read ambient pressure higher than actual. (Maybe that's why my gas mileage seems to worse than everyone else!) It takes about 5 miles or so of driving before the temp sensor reads real air temp. And has been said, it is sensitive to being heated by sun shining on the frunk. Hot air from around the engine may move over it also when you are stopped.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|