-
Hello All- horn issue
I had a vendor install a horn about two years ago. well like most things its not working any more. It has a relay and o have power to it. how do I jump it out to check to see if that is the issue....
-
Very Active Member
Hi Mosess, take the ground and the hot wire ( hope your installer used colored wire ( black is - and red is + _ and touch them to there horn leads ( It will be loud if the horn ISN"T the problem). No honking= bad relay, which can be purchased for a few $ at any decent auto parts store.
Of course------- check the fuse first
Last edited by Lew L; 04-14-2019 at 05:33 PM.
Reason: speeling
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
Ozzie Ozzie Ozzie
-
I run a bad boy horn from Spyderpops, no relay. Not that expensive and works just fine
-
Hi guys after thinking I checked all the fuses I missed one. I still don't now how or why it was blown. looking at the front of the RT the fuses on the left side Number 5 the 25amp one. it may have some thing to do with the trailer harness that was no good....the wiring was not done with red and black. all black.....any way it works now I need to take hard look at knowing more but time is not a friend these days. thanks
-
Active Member
I'm glad your horny again. Well, you know what I mean. LOL
-
THANKS my horn had quit and Thanks to you I found the blown fuse now my horn works and can get it inspected
-
There you go....
You fixed it before I could suggest checking the fuses and it is the most common issue. Check what else is hooked to that fuse as it may not be the only thing that could have caused the blowing out...
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|