-
Locking a Shoei Neo Tec2 Helmet
I have 2 orf the Shoei Neo Tec2 helmets with the new metal slide locking system. I am hoping someone on here either has or can come up with a solution for locking the helmets as they do not have a D ring for locking. I have called Shoei and they were no help other than say buy a plastic cable and lock to the bike. I would like to make something but I do not have the stuff needed. I would like to make a receiver for the metal slide that has a key lock and a way to lock to the bike. I may just stick with the cable and padlock.
Thank you,
Ray B.
These are the states I have driven my Spyder Rt Limited too.
Mudflap -- Walmart
Tricled Headlights and Fog lights -- valueaccessories.comRimsavers -- RimBladesUSA.com
Showchrome Tiregard (TPMS) -- motorcycleid.com
Front and side grilles -- CanAmSpyderAccessories
Passenger arm rest -- Diamond R Accessories
Rear axle caps -- Lamonster
Magic Mirrors -- Lamonster
Yellow and red running and blinker lights on fender --Show Chrome
TRUNK-MOUNTED, DOUBLE FLAG HOLDER -- Rivco
Rear Brake light for trunk -- Custom Dynamics
Bumpskid w/led lights -- Spyderpops
Seat cushion -- Airhawk
Cup holders -- Drink2Go
Ultragard-4-457BK-Black-Cover-Spyder -- Big Bike Parts
-
Do you have a picture of the mechanism? I cant find one.
-
Ozzie Ozzie Ozzie
If you are talking about the slide latch on the chin straps instead of the 2 D rings, then the LidLock 'T' bar that you put thru the D rings then lock to the bike will also work with those slide latches. You just slide the 'T' bar thru the latch instead of the strap, then lock the end of the 'T' into the LidLock as you would normally.
LidLocks are good that way, work with the 2 D rings OR the Slide Latch.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Here are 2 pictures of the locking mechanismIMG_9178.jpgIMG_9177.jpg
Thank you,
Ray B.
These are the states I have driven my Spyder Rt Limited too.
Mudflap -- Walmart
Tricled Headlights and Fog lights -- valueaccessories.comRimsavers -- RimBladesUSA.com
Showchrome Tiregard (TPMS) -- motorcycleid.com
Front and side grilles -- CanAmSpyderAccessories
Passenger arm rest -- Diamond R Accessories
Rear axle caps -- Lamonster
Magic Mirrors -- Lamonster
Yellow and red running and blinker lights on fender --Show Chrome
TRUNK-MOUNTED, DOUBLE FLAG HOLDER -- Rivco
Rear Brake light for trunk -- Custom Dynamics
Bumpskid w/led lights -- Spyderpops
Seat cushion -- Airhawk
Cup holders -- Drink2Go
Ultragard-4-457BK-Black-Cover-Spyder -- Big Bike Parts
-
Very Active Member
I have modular helmets and IMO the most secure way to lock them is with a plastic sheathed cable the goes through the eyeports and the passenger grab bar.
Hardware stores carry the cable and the clamping devices that are simply set with a hammer. Buy enough length to be able to set each helmet on the two seats. Just make a loop at each end of the cable add a padlock and viola, you have a helmet lock.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Very Active Member
Count me in on the Lidlox.. Very easy to use and work with all helmets. I have ones with the slide lock and ones with D-rings.
-
Very Active Member
Lidlox do work. We have Shoie Neo-Tec2 helmets and just open the ratchet mechanism and slide the T bar in and lock them on the handle bars.
White 2013 Spyder RT Limited. BajaRon Swaybar, Custom Dynamic Third Brake Light. Ultimate Custom Black and White seat with driver and passenger back rest. Gloryder Led Wheel lights.Custom Dynamics Led Bright sides, Amber and Red Fender lights, and Saddle Bag Bright sides.
2016 F3 Limited Intense Red Pearl. Lidlox, BRP Driver Back Rest, BRP Passenger Back Rest,Fog Lights, GPS, Signature Light! Custom Dynamics LED Bright Sides, Amber and Red Fender lights, and Saddle Bag Bright Sides.
-
Originally Posted by Daddyray
I have 2 orf the Shoei Neo Tec2 helmets with the new metal slide locking system. I am hoping someone on here either has or can come up with a solution for locking the helmets as they do not have a D ring for locking. I have called Shoei and they were no help other than say buy a plastic cable and lock to the bike. I would like to make something but I do not have the stuff needed. I would like to make a receiver for the metal slide that has a key lock and a way to lock to the bike. I may just stick with the cable and padlock.
Lidlox Tbar goes through the clasp.
https://lidlox.com/products/1012-b
-
Very Active Member
I like to use a cable lock as when it gets hot and we stop to walk around or eat I can run the cable through my sleeve and leave my jacket with the bike and it's safe.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|