Something about my fat head that I can't get on a full face! Only the flip up lets me widen the opening a smidge tugging on the straps to get it on comfortably.
Long time Shoei customer, so I picked up my first Neotec 2 this Winter.
I got out today for a 38 mile ride up to double zero's
35 and snowing in Minneapolis this afternoon, no helmet issues at all
I wear a full face helmet( VOX) it has built-in sun visor.
I have has the full face helmet for 5 years.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Wife and I wear LS2 Valiant.
I may be misstating but I believe they are one of the few modular helmets that are DOT approved in both configurations; chin bar down and locked and flipped all the way back to the rear of the helmet.
I wear a modular GMAX 54s. It is a comfortable helmet with a good airflow venting system for hot days. It also has a red light on the back that I do turn on when riding at dusk/dark to make myself more visible. So far it has been a good helmet. Prior to this I had a full face Sedici Strada (vended by Cycle Gear in Madison, WI) that also was good to me for a number of years. The old rule of thumb I've heard is helmets should be retired around 5-7 years of age. Anyone else hear that kind of advice?
I wear a modular GMAX 54s. It is a comfortable helmet with a good airflow venting system for hot days. It also has a red light on the back that I do turn on when riding at dusk/dark to make myself more visible. So far it has been a good helmet. Prior to this I had a full face Sedici Strada (vended by Cycle Gear in Madison, WI) that also was good to me for a number of years. The old rule of thumb I've heard is helmets should be retired around 5-7 years of age. Anyone else hear that kind of advice?
yes, motorcycle safety class recommends replace every 5 years.
Wife and I have always worn full-face helmets for the added safety. I wear glasses but it only takes about 10 seconds to take them off, put the helmet on and put the glasses back on. If a few seconds save my life, that's a good investment. There is another reason - Arai helmets are the most comfortable for me and they don't even make a modular helmet.
They don't make a modular because they can't get Snell Certification. That is also why they came out with the "External Flip Up Sun Visor" as Snell will not approve the internal flip up sun visor.
White 2013 Spyder RT Limited. BajaRon Swaybar, Custom Dynamic Third Brake Light. Ultimate Custom Black and White seat with driver and passenger back rest. Gloryder Led Wheel lights.Custom Dynamics Led Bright sides, Amber and Red Fender lights, and Saddle Bag Bright sides.
2016 F3 Limited Intense Red Pearl. Lidlox, BRP Driver Back Rest, BRP Passenger Back Rest,Fog Lights, GPS, Signature Light! Custom Dynamics LED Bright Sides, Amber and Red Fender lights, and Saddle Bag Bright Sides.
They don't make a modular because they can't get Snell Certification.
You keep saying that, but it is misleading. Snell certifies helmets primarily for the RACING community, so yes, their standards will be higher than the regular CONSUMER community. So if a manufacturer is not MAKING a helmet designed to meet RACING standards to begin with, of course they probably won't get a Snell certification. But Snell has 3 different categories of ratings also. Primarily, they will not "certify" a modular helmet because it doesn't meet RACING standards. And yes...as of today, you won't see professional RACING riders wearing modular helmets during competition events.
But that does NOT mean that ALL modular helmets are "unsafe" or aren't "as safe as" a full face helmet for a non-racing environment user JUST BECAUSE Snell won't certify the helmet.
Just because Snell doesn't or won't "certify" a non-racing designed helmet does NOT mean the helmet is unsafe for NORMAL everyday riding use.
For those who want to understand it all, here is the link to the FAQ's Snell site. Well worth reading ALL of it to understand the reality of the situation instead of just blindly implying something like "no modulars are safe because they aren't Snell certified".
You keep saying that, but it is misleading. Snell certifies helmets primarily for the RACING community, so yes, their standards will be higher than the regular CONSUMER community. So if a manufacturer is not MAKING a helmet designed to meet RACING standards to begin with, of course they probably won't get a Snell certification. But Snell has 3 different categories of ratings also. Primarily, they will not "certify" a modular helmet because it doesn't meet RACING standards. And yes...as of today, you won't see professional RACING riders wearing modular helmets during competition events.
But that does NOT mean that ALL modular helmets are "unsafe" or aren't "as safe as" a full face helmet for a non-racing environment user JUST BECAUSE Snell won't certify the helmet.
Just because Snell doesn't or won't "certify" a non-racing designed helmet does NOT mean the helmet is unsafe for NORMAL everyday riding use.
For those who want to understand it all, here is the link to the FAQ's Snell site. Well worth reading ALL of it to understand the reality of the situation instead of just blindly implying something like "no modulars are safe because they aren't Snell certified".
Please Please Please don't put words in my mouth. I never said anything about safety. You even quoted me, and I never said anything about Safety. The Snell Foundation is Located in my town. I have toured their facility, and they have been guests at our club meeting. I know a bit about Snell. It matters not why they will or will not certify a helmet. They have their standards, and modulars do not meet those standards. Full face helmets with interior flip down sun shades do not meet their standards. They would be happy to certify a modular helmet, and they have tested many of them, but they don't meet the minimum standards. In fact most full face helmets don't meet those standards, and are not certified. So I have worn Arai Snell Certified helmets in the past, mainly for comfort as they have great ventilation and for my head shape they fit great. I now where Shoei Neo-Tec 2 not certified by Snell, but safe enough for me. So do me a favor. If you are going to quote me, get it right.
White 2013 Spyder RT Limited. BajaRon Swaybar, Custom Dynamic Third Brake Light. Ultimate Custom Black and White seat with driver and passenger back rest. Gloryder Led Wheel lights.Custom Dynamics Led Bright sides, Amber and Red Fender lights, and Saddle Bag Bright sides.
2016 F3 Limited Intense Red Pearl. Lidlox, BRP Driver Back Rest, BRP Passenger Back Rest,Fog Lights, GPS, Signature Light! Custom Dynamics LED Bright Sides, Amber and Red Fender lights, and Saddle Bag Bright Sides.
They would be happy to certify a modular helmet, and they have tested many of them, but they don't meet the minimum standards.
I wasn't "putting words in your mouth". I quoted your reply to another person's reply about them wearing a full face helmet for the "additional safety" of it. And that the maker of that helmet didn't make modulars. You then said the maker didn't make modulars "because they couldn't get Snell to certify one".
My point in my post was in regards to what your post DOES imply (again) in what I just quoted you again above. The Snell standard is not "the" standard for the entire motorcycle helmet industry. It is "a" standard established by Snell alone. If Snell decides to use their own standard(s) for every helmet, of course some won't meet Snell's requirements. But this thread is full of "implications" that no modular helmet is safe because Snell won't certify them. And that is a wrong impression for any motorcycle forum to express, especially to a potential new rider coming here looking for accurate safety information.
That's all I was saying. So please don't put words in my mouth either. Miscommunication and misunderstanding is a hazard of all written communication.
You keep saying that, but it is misleading. Snell certifies helmets primarily for the RACING community, so yes, their standards will be higher than the regular CONSUMER community. So if a manufacturer is not MAKING a helmet designed to meet RACING standards to begin with, of course they probably won't get a Snell certification. But Snell has 3 different categories of ratings also. Primarily, they will not "certify" a modular helmet because it doesn't meet RACING standards. And yes...as of today, you won't see professional RACING riders wearing modular helmets during competition events.
But that does NOT mean that ALL modular helmets are "unsafe" or aren't "as safe as" a full face helmet for a non-racing environment user JUST BECAUSE Snell won't certify the helmet.
Just because Snell doesn't or won't "certify" a non-racing designed helmet does NOT mean the helmet is unsafe for NORMAL everyday riding use.
For those who want to understand it all, here is the link to the FAQ's Snell site. Well worth reading ALL of it to understand the reality of the situation instead of just blindly implying something like "no modulars are safe because they aren't Snell certified".
"They don't make a modular because they can't get Snell Certification. That is also why they came out with the "External Flip Up Sun Visor" as Snell will not approve the internal flip up sun visor."
Now that is the exact thing I posted. You have an active imagination, or a poor understanding of the English language, neither of which is a bad thing. You even said, "You keep saying that", and I had only made one post on the subject. No where do I make a statement about safety, or that Snell is better than any other rating DOT, or ECE. I merely pointed out that Arai thinks that the Snell certification is important to them and their customers. I also stated that I wore Arai for a while for comfort, not safety. Again stick to your own words, I think you will be better off.
White 2013 Spyder RT Limited. BajaRon Swaybar, Custom Dynamic Third Brake Light. Ultimate Custom Black and White seat with driver and passenger back rest. Gloryder Led Wheel lights.Custom Dynamics Led Bright sides, Amber and Red Fender lights, and Saddle Bag Bright sides.
2016 F3 Limited Intense Red Pearl. Lidlox, BRP Driver Back Rest, BRP Passenger Back Rest,Fog Lights, GPS, Signature Light! Custom Dynamics LED Bright Sides, Amber and Red Fender lights, and Saddle Bag Bright Sides.
Currently wearing Scorpion EXO GT-920 Modular (with sun shield) for both me and the misses and very pleased with them.
Occasionally wear our HJC Half-helmets, but have been using less since getting the modulars.
We had always used full-face helmets prior. We both wear glasses and find the modulars much easier to put the glasses on with the chin bar up. Also makes it easy to grab the water bottle or chat with a co-rider at a stop light, or open the helmet in traffic.
Raprider (Rich)
2016 Can-Am Spyder ST-S SE5 Steel Black Metallic (Blackbird)
BRP Audio, Heated Grips, Fog Lights, Passenger Backrest, Givi Saddlebags/Top Case
BajaRon Swaybar, TricLed Wide-Vu Mirrors, Lamonster Ram mount and X-grip, Sena 20S Evo Dual
TricLed Sequential Front SpyderFenderz, Dual Color Run/Brake/Turn LEDs, Brake Flasher
Kumho Ecsta AST installed on rear 4/2021
1996 Yamaha Virago 750 (Vera) - still riding
1987 Honda Shadow 500 (Shady) - sold
1982 Honda Rebel 250 (Little Reb) - sold
Something about my fat head that I can't get on a full face! Only the flip up lets me widen the opening a smidge tugging on the straps to get it on comfortably.
try the arai quanum x--if you're round/round oval---slight force needed to pull it on /off but really gotten comfortable with the full face security and how well designed it is
I would love to have a modular helmet. Unfortunately, I have a long-oval head, and no one makes a modular helmet for that head shape. I tried a Neotec, but it created a monstrously unbearable hot spot on my forehead after about an hour. So I'm stuck with Arai Signets, a full-face helmet.
In the short time I tried the Neotec, I noticed how nose-heavy it was compared to my Arai. Annoyingly so.
I used a full face for over 10 years, then switched to modular (HJC RPHA MAX). Love the helmet, and really like the Pinlock insert. It makes an enormous difference when riding in bad weather. I can remember riding with my full face helmet in bad weather with my visor cracked open to try to keep it from fogging, but the Pinlock solved that.