Page 1 of 2 12 LastLast
Results 1 to 25 of 43
  1. #1
    Member
    Join Date
    Mar 2019
    Location
    Oklahoma City
    Posts
    1
    Spyder Garage
    0

    Default RT Vent Kit Installation Help

    Sorry if this is a request already provided but, I couldn't find anything specific regarding installation instructions for an RT Vent Kit. I ordered the kit and it was delivered without instructions. Thanks in advance for any help

  2. #2
    Very Active Member
    Join Date
    Sep 2014
    Location
    USA
    Posts
    4,649
    Spyder Garage
    0

    Default

    Your will need the templets too. Someone will email the info. I know someone has them here.

  3. #3
    Very Active Member
    Join Date
    Dec 2015
    Location
    Oakley Utah
    Posts
    8,126
    Spyder Garage
    0

    Default

    Quote Originally Posted by erua View Post
    Sorry if this is a request already provided but, I couldn't find anything specific regarding installation instructions for an RT Vent Kit. I ordered the kit and it was delivered without instructions. Thanks in advance for any help
    PM me with your email address and I'll send you the PDFs
    2014 RTL Platinum


  4. #4
    Active Member kdp1308's Avatar
    Join Date
    Jul 2018
    Location
    Wichita, KS
    Posts
    48
    Spyder Garage
    0

    Default

    I assume you are talking about a 2013? If so I could take pictures of one installed.

  5. #5
    Active Member TheCajun1957's Avatar
    Join Date
    Jun 2016
    Location
    Kilgore Tx.
    Posts
    305
    Spyder Garage
    0

    Default

    Sorry, I lost the files when my laptop died. When you get the files, read through them. TAKE YOUR TIME, think things thru, make sure before you cut. Its nerve racking to think about cutting the Tupperware. the other side goes a little easier.
    2018 White F3 Limited

  6. #6
    Member
    Join Date
    Jun 2019
    Location
    Farmingville
    Posts
    27
    Spyder Garage
    1

    Default

    Can someone please post Docs install instructions?
    2012 RT-S SM5 , Pure Magnesium Metallic

  7. #7
    Very Active Member
    Join Date
    Feb 2020
    Location
    N. Wilkesboro, NC
    Posts
    1,902
    Spyder Garage
    0

    Default

    What vents are we referring to? What year(s)?

  8. #8
    Active Member
    Join Date
    May 2018
    Location
    Chateauguay, Qc, Canada
    Posts
    339
    Spyder Garage
    1

    Default

    I have some files that I have been sending to a few of the folks on here. Send me a PM and I'll send them to you.

    The vent kit is for the V twin motor RT's 2010-2013. It stops your feet from frying.
    Eckhard

    Spyder RT Ltd, 2011
    2011 RT Ltd. , Pearl White

  9. #9
    Member
    Join Date
    Jun 2019
    Location
    Farmingville
    Posts
    27
    Spyder Garage
    1

    Default

    2010 RT

    PM sent
    Thanks
    2012 RT-S SM5 , Pure Magnesium Metallic

  10. #10
    Very Active Member Copperman's Avatar
    Join Date
    Mar 2013
    Location
    Maumelle, AR
    Posts
    2,151
    Spyder Garage
    2

    Default

    If you have the BRP part number go here: https://instructions.brp.com/e-instr...&sku=710004533

    You can print out the directions for the install.
    2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
    2020 RT Limited , Chalk

  11. #11
    Active Member
    Join Date
    Jul 2018
    Location
    Fountain Hills,AZ
    Posts
    336
    Spyder Garage
    0

    Default

    This link comes up as gps mount install...….

  12. #12
    Very Active Member Copperman's Avatar
    Join Date
    Mar 2013
    Location
    Maumelle, AR
    Posts
    2,151
    Spyder Garage
    2

    Default

    Quote Originally Posted by wilpir View Post
    This link comes up as gps mount install...….
    Yes. If you have the BRP part number put it in where it asks and you should get directions. On that page, scroll up a little and you'll see where to put it.
    2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
    2020 RT Limited , Chalk

  13. #13
    Very Active Member Revalden's Avatar
    Join Date
    Nov 2018
    Location
    Claremore, Ok.
    Posts
    683
    Spyder Garage
    1

    Default

    UtahPete sent the pics of his install. I put the Vent Kit on my 2015 and I'm VERY happy with the results. Now I don't get hot air coming up from the motor, and the Glove Box is cool enough that whatever you put in there isn't so hot you burn your hands. You don't need to cut a hole in the Tupperware, just remove the grill and everything will be hunkie dorie. Take all the parts out and fit them together on the kitchen table, they don't seem like they are compatable but keep trying until "The AH HA Moment". If there is a dealer near you that has been into Spyders from the git go, they might have the instructions in their files, ask, but remember the the Vents were for the 08-13 years. Good luck, and happy wrenching.
    2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
    Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
    Passenger Arm Rests, Windshield Air Wing
    Baja Ron's Sway Bar & Spring Adjusters
    Air Scoops, LaMonster's Hiway Pegs
    Magnetic Mirror Mounts, Air Innovations Seat Cushion
    Red Chrome pin striping on Black hood
    Federal Formoza AZ01 front tires (they're GREAT)
    Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
    LED bars above radiator inlets
    LED brake/running/turn signals on license plate frame
    Tag-Along trailer
    LED headlights LED fog lights (WOW)
    2" x 2" Road Lights inside front fenders
    7' x 10' Cargo trailer
    Garmin 396 LM GPS
    RLS Cat-delete resonator with China Akropovic muffler
    New Banshee AGM
    M3 TPMS on front tires
    Remote Control for Heated Jacket and Heated Riding Pants
    Analog Clock and Analog Volt Meter
    Loose Nut Behind Handlebars
    2015 RT-S Special Series , Stock Spark Plugs Brake Pedal Extension Cherry Red/Black

  14. #14
    Active Member Eviltwin's Avatar
    Join Date
    Oct 2017
    Location
    Portsmouth VA
    Posts
    366
    Spyder Garage
    1

    Default

    Quote Originally Posted by Revalden View Post
    You don't need to cut a hole in the Tupperware, just remove the grill and everything will be hunkie dorie. T
    I'm not sure about that. Part of the what the vents do is to funnel much more air through the engine compartment and to do that they need larger openings than were originally made on the panels.



    2019 BMW C650GT, 2010 Spyder RT-S, 2009 BMW R1200RT,(sold) 2009 Honda Silverwing (Sold), 2009 Kawasaki 500 Vulcan (Sold)

    \
    2010 RT SE5 , Black

  15. #15
    Very Active Member
    Join Date
    Dec 2015
    Location
    Oakley Utah
    Posts
    8,126
    Spyder Garage
    0

    Default

    Quote Originally Posted by Eviltwin View Post
    I'm not sure about that. Part of the what the vents do is to funnel much more air through the engine compartment and to do that they need larger openings than were originally made
    2014 RTL Platinum


  16. #16
    Very Active Member Revalden's Avatar
    Join Date
    Nov 2018
    Location
    Claremore, Ok.
    Posts
    683
    Spyder Garage
    1

    Default

    Quote Originally Posted by UtahPete View Post
    Just removing the grill has worked very well around here, Oklahoma, in 100 deg heat even in stop an go traffic. Do whatever you want.
    2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
    Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
    Passenger Arm Rests, Windshield Air Wing
    Baja Ron's Sway Bar & Spring Adjusters
    Air Scoops, LaMonster's Hiway Pegs
    Magnetic Mirror Mounts, Air Innovations Seat Cushion
    Red Chrome pin striping on Black hood
    Federal Formoza AZ01 front tires (they're GREAT)
    Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
    LED bars above radiator inlets
    LED brake/running/turn signals on license plate frame
    Tag-Along trailer
    LED headlights LED fog lights (WOW)
    2" x 2" Road Lights inside front fenders
    7' x 10' Cargo trailer
    Garmin 396 LM GPS
    RLS Cat-delete resonator with China Akropovic muffler
    New Banshee AGM
    M3 TPMS on front tires
    Remote Control for Heated Jacket and Heated Riding Pants
    Analog Clock and Analog Volt Meter
    Loose Nut Behind Handlebars
    2015 RT-S Special Series , Stock Spark Plugs Brake Pedal Extension Cherry Red/Black

  17. #17
    Active Member scarecrow's Avatar
    Join Date
    Sep 2013
    Location
    largo, florida
    Posts
    315
    Spyder Garage
    1

    Default

    Live here in Clearwater Fl. added the vents to my 14RTS also didn't cut anything out. I just removed the grill vents. No problems and we spend alot of time in traffic. We'll see what happens in the summertime heat and humidity.
    2014 RTS , Cognac

  18. #18
    Very Active Member Revalden's Avatar
    Join Date
    Nov 2018
    Location
    Claremore, Ok.
    Posts
    683
    Spyder Garage
    1

    Default

    Quote Originally Posted by erua View Post
    Sorry if this is a request already provided but, I couldn't find anything specific regarding installation instructions for an RT Vent Kit. I ordered the kit and it was delivered without instructions. Thanks in advance for any help
    Bring your Spyder over here to Claremore, about 30 miles north of Tulsa off of hwy 44 exit 255 then right on hwy 20 east, then right turn onto 4170 rd. your gps will bring you here. PM to me if interested.
    2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
    Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
    Passenger Arm Rests, Windshield Air Wing
    Baja Ron's Sway Bar & Spring Adjusters
    Air Scoops, LaMonster's Hiway Pegs
    Magnetic Mirror Mounts, Air Innovations Seat Cushion
    Red Chrome pin striping on Black hood
    Federal Formoza AZ01 front tires (they're GREAT)
    Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
    LED bars above radiator inlets
    LED brake/running/turn signals on license plate frame
    Tag-Along trailer
    LED headlights LED fog lights (WOW)
    2" x 2" Road Lights inside front fenders
    7' x 10' Cargo trailer
    Garmin 396 LM GPS
    RLS Cat-delete resonator with China Akropovic muffler
    New Banshee AGM
    M3 TPMS on front tires
    Remote Control for Heated Jacket and Heated Riding Pants
    Analog Clock and Analog Volt Meter
    Loose Nut Behind Handlebars
    2015 RT-S Special Series , Stock Spark Plugs Brake Pedal Extension Cherry Red/Black

  19. #19
    Active Member
    Join Date
    Mar 2019
    Location
    NEBRASKA
    Posts
    433
    Spyder Garage
    1

    Default

    I did the same.Left panels intact. Place the scoops on top. Done.
    2012 RTL 14 RTS , Pearl White @ Pearl White

  20. #20
    Active Member
    Join Date
    Aug 2014
    Location
    Central Oklahoma
    Posts
    294
    Spyder Garage
    1
    2020 RT Limited , Petrol Metallic Dark

  21. #21
    Active Member
    Join Date
    Mar 2019
    Location
    NEBRASKA
    Posts
    433
    Spyder Garage
    1

    Default

    My dealer sold me the kit for $69 in 4 /2020 part # 219800388
    2012 RTL 14 RTS , Pearl White @ Pearl White

  22. #22
    Member
    Join Date
    Aug 2020
    Location
    Germany
    Posts
    19
    Spyder Garage
    0

    Default

    Quote Originally Posted by sduskin View Post

    The link for the instructions does not work anymore.
    Is it possible, that someone could place the instructions again and link it here?
    Many thanks
    Michael

  23. #23
    Active Member
    Join Date
    May 2018
    Location
    Chateauguay, Qc, Canada
    Posts
    339
    Spyder Garage
    1

    Default

    Quote Originally Posted by WhiteCat View Post
    The link for the instructions does not work anymore.
    Is it possible, that someone could place the instructions again and link it here?
    Many thanks
    Michael
    PM me your email and Ill send you the instructions.
    Eckhard

    Spyder RT Ltd, 2011
    2011 RT Ltd. , Pearl White

  24. #24
    Member
    Join Date
    Jan 2021
    Location
    MS
    Posts
    2
    Spyder Garage
    0

    Default

    Any way to get a copy of the install plans?

  25. #25
    Active Member
    Join Date
    May 2018
    Location
    Chateauguay, Qc, Canada
    Posts
    339
    Spyder Garage
    1

    Default

    PM me your email and Ill send you the instructions.
    Eckhard

    Spyder RT Ltd, 2011
    2011 RT Ltd. , Pearl White

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •