Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Feb 2019
    Location
    GA
    Posts
    3
    Spyder Garage
    0

    Default Instrument Cluster swap to color LCD??

    I’m looking at rebuilding a wrecked 2011 RSS and was wondering if it is possible to swap in a color instrument cluster from a higher spec’d model or a newer model Spyder RT. Has anyone done this or looked at it before? Physically they look similar and it appears to have the same electrical connector on the rear. With the Can-Am Spyders using a sort of CAN BUS communication system it makes sense that it might work but maybe would need a re-coding (BUDs?).

    I’d also like to know if the Spyder will run without the instrument cluster? Long story, but a valid question.

    I’m new to the forum and Spyders and have looked through the site using search without luck.

    Thanks!

  2. #2
    Active Member
    Join Date
    Jul 2018
    Location
    Germany
    Posts
    60
    Spyder Garage
    1

    Default

    I tried to install the cluster of an RT from 2010 on my ST from 2013 and it works fine..
    Only the background color was different - the older one ist blue, the newer is yellow..

    greatings from germany
    Reiner
    2014 STS SE5 , circuit yellow (metallic)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •