Results 1 to 2 of 2
  1. 05-25-2021, 12:56 PM #1
    KenF
    KenF is offline
    Active Member KenF's Avatar
    Join Date
    May 2019
    Location
    Lacey, WA
    Posts
    32
    Spyder Garage
    2

    Default Need instructions on removing 2020 RT left side inner panel

    Does anyone have instructions on how to remove the left side inner panel on a 2020 RT Limited. I know about how the top panel and outer panel come off. But have never seen any one mention the inner panel. This panel needs to be removed to access the the belt tensioner pully.
    Last edited by Peter Aawen; 05-25-2021 at 06:04 PM. Reason: Removed Prefix - this is a 'How do I?' not a 'How to:' DIY explanation....
    2020 Spyder RT Limited
    2020 RT Limited , Marsala Red/Chrome
    Reply With Quote Reply With Quote
  2. 05-25-2021, 07:01 PM #2
    Jetfixer
    Jetfixer is offline
    Very Active Member Jetfixer's Avatar
    Join Date
    Feb 2016
    Location
    Lake Wylie, South Carolina, USA
    Posts
    1,047
    Spyder Garage
    2

    Default

    All you need to remove is the black piece above the drivers' left footboard. There are 3 torx screws at the front about even with the rear of the front fender. Then there are the 6 screws around the rest of that panel. Be careful putting these 6 back in; they only go into plastic and are easy to strip. I've added the belt idler and changed out my front pulley to the white one through this panel only.
    2020 RT Limited , Marsala Red
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules