Results 1 to 21 of 21
  1. #1
    Very Active Member chris56's Avatar
    Join Date
    Jan 2009
    Location
    austria
    Posts
    1,545
    Spyder Garage
    1

    Default new windshield for the ryker

    what do you think, maybe I could the lower side tape in black or so ????

    https://www.ebay.co.uk/itm/Calsci-Wi...vOW6CLxZ4PIkH0
    Outlander fairing - Fox-shock - BajaRon Swaybar - Hankook tire/ back - 165/50 Imperial tires front & longer front shocks - GIVI Topase - Shad sidecases -heated grips - new seats

  2. #2
    Active Member QuasiMotard's Avatar
    Join Date
    Jan 2019
    Location
    Houston, TX
    Posts
    112
    Spyder Garage
    0

    Default MadStad Engineering windshield

    I purchased the OEM sport windshield, but I haven't mounted it yet. So, I don't have an opinion on how well it works (or not).

    I have the MadStad Engineering shield on a couple of my Honda's, and I can't say enough good things about them. Their shields are available in a variety of heights and colors, and the whole mechanism allows for height and rake adjustment. I contacted them via email a few days ago to inquire if/when they would have something available for the Ryker. They didn't have an ETA yet, but said that the Ryker was on their radar. Maybe if enough of us inquired, they might move that project to the front burner?

    https://madstad.com/

    If I lived on the East coast, I would offer my OEM shield and/or Ryker for beta testing. Any Ryker owners in or near Brooksville, Florida?

    --
    QM
    Last edited by QuasiMotard; 02-07-2019 at 03:53 PM. Reason: Added location for MadStad Engineering

  3. #3
    Active Member QuasiMotard's Avatar
    Join Date
    Jan 2019
    Location
    Houston, TX
    Posts
    112
    Spyder Garage
    0

    Default

    Quote Originally Posted by chris56 View Post
    what do you think, maybe I could the lower side tape in black or so ????

    https://www.ebay.co.uk/itm/Calsci-Wi...vOW6CLxZ4PIkH0
    @chris56 : Are you required to have any special industry or government certifications for your motorcycle accessories in Austria? For example: CE, TÜV, or other approvals?

    --
    QM

  4. #4
    Very Active Member chris56's Avatar
    Join Date
    Jan 2009
    Location
    austria
    Posts
    1,545
    Spyder Garage
    1

    Default

    Quote Originally Posted by QuasiMotard View Post
    @chris56 : Are you required to have any special industry or government certifications for your motorcycle accessories in Austria? For example: CE, TÜV, or other approvals?
    QM
    YES but Austria is a part from Europe - so each part which is CE tested is allowed to use - the TÜV is more a german system what helps to get the CE approvals .. but there are still some diferent norms in each Country (like tires) - diferent to the USA is the (head-)Lighting System and the max noise of the exhaust, which is lower here in Europe ..
    (e.G. - in Austria we have to pay for each vehicle an extra tax depending the CO2-emmissions - so my Ryker 900 is 14% !! more expensive like in Germany or so)
    Outlander fairing - Fox-shock - BajaRon Swaybar - Hankook tire/ back - 165/50 Imperial tires front & longer front shocks - GIVI Topase - Shad sidecases -heated grips - new seats

  5. #5
    Member
    Join Date
    Feb 2019
    Location
    Vero Beach FL
    Posts
    11
    Spyder Garage
    0

    Default

    I have the oem windshield for my 900. In my opinion worth the money. Even though small gets the job done.

  6. #6
    Very Active Member chris56's Avatar
    Join Date
    Jan 2009
    Location
    austria
    Posts
    1,545
    Spyder Garage
    1

    Default

    I ordered now this one here for a beta-test ..
    Attached Images Attached Images
    Outlander fairing - Fox-shock - BajaRon Swaybar - Hankook tire/ back - 165/50 Imperial tires front & longer front shocks - GIVI Topase - Shad sidecases -heated grips - new seats

  7. #7
    Very Active Member Sarge707's Avatar
    Join Date
    May 2009
    Location
    Connecticut
    Posts
    3,658
    Spyder Garage
    0

    Default

    My New MRA highway screen- Had to cut the black bottom off to open storage bin. For $110 its a Big improvement (To Me) for the Ryker while Not being Bulbous (Is dat a word?)
    Attached Images Attached Images

    2015 F3 sm6, Custom Dynamics fender lights.

    Sea Doo GTI-SE 90 Jet Ski!!

  8. #8
    Very Active Member
    Join Date
    Nov 2018
    Location
    N.E. Ohio
    Posts
    520
    Spyder Garage
    0

    Default

    Man, that looks sweet. cueman

  9. #9
    Very Active Member Tslepebull's Avatar
    Join Date
    Dec 2018
    Location
    East Texas
    Posts
    606
    Spyder Garage
    1

    Default

    Quote Originally Posted by Sarge707 View Post
    My New MRA highway screen- Had to cut the black bottom off to open storage bin. For $110 its a Big improvement (To Me) for the Ryker while Not being Bulbous (Is dat a word?)
    Close enough!

    https://www.bing.com/search?q=bulbus...HnquAd166i%21c
    2019 Ryler Rally , Shock Yellow

  10. #10
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default

    F4 Customs will have there recurve shield for the Ryker out soon
    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

  11. #11
    Member
    Join Date
    Jan 2019
    Location
    New Port Richey, Fla
    Posts
    18
    Spyder Garage
    0

    Default

    Just for the heck of it i tried putting my old honda shadow 750 windshield on my ryker. I was trying to sell it for $50 with no takers. Well, it seems to fit pretty good. I used the included honda mounts but had to make some aluminum adapters for the handlebar mounts. Made these from a old aluminum walker leg. Looks good and fit is very tight. the adapters are because honda handlebars are 1 inch and ryker handlebars are 3/4 inch. Took it out for a ride and the wind does not blow the sunglasses off my face. Seems the windshield top edge is just below my eye level so i don't get much buffering around my head. I like it and it looks better than the factory or the calsci ones i looked at. I'll put a pic up tomorrow.

    My pics




  12. #12
    Very Active Member Tslepebull's Avatar
    Join Date
    Dec 2018
    Location
    East Texas
    Posts
    606
    Spyder Garage
    1

    Default

    Quote Originally Posted by srx660 View Post
    Just for the heck of it i tried putting my old honda shadow 750 windshield on my ryker. I was trying to sell it for $50 with no takers. Well, it seems to fit pretty good. I used the included honda mounts but had to make some aluminum adapters for the handlebar mounts. Made these from a old aluminum walker leg. Looks good and fit is very tight. the adapters are because honda handlebars are 1 inch and ryker handlebars are 3/4 inch. Took it out for a ride and the wind does not blow the sunglasses off my face. Seems the windshield top edge is just below my eye level so i don't get much buffering around my head. I like it and it looks better than the factory or the calsci ones i looked at. I'll put a pic up tomorrow.

    My pics



    I like the trim strip along the bottom. I may just do that to my CalSci
    2019 Ryler Rally , Shock Yellow

  13. #13
    Active Member
    Join Date
    Apr 2019
    Location
    OH
    Posts
    62
    Spyder Garage
    0

    Default

    F4 Customs has the windshield for the Ryker. Had it installed this week and it is a big step up, in quality and usage. Two heights, in either clear or tint. I am really happy with this product!

  14. #14
    Active Member
    Join Date
    Jun 2019
    Location
    Florida
    Posts
    286
    Spyder Garage
    0

    Default

    The Can Am OEM windshield is too short for many folks, especially me. I tried to modify mine by making extensions but it didn't work out. I like the ideas above. I am going to search Ebay for an inexpensive replacement and maybe sell mine. It is better than no windshield but the wind still hits just about all my face. It doesn't help that I have added about another inch to my height by using the AirHawk pad. I plan to add new handlebars or risers to my Ryker so I am waiting off on buying a new windshield. The OEM one still keeps most of the rain off my chest.

  15. #15
    Member
    Join Date
    May 2019
    Location
    Canada
    Posts
    19
    Spyder Garage
    0

    Default

    I meant this windshield chris were did you find it

  16. #16
    Very Active Member chris56's Avatar
    Join Date
    Jan 2009
    Location
    austria
    Posts
    1,545
    Spyder Garage
    1

    Default

    the old one is this here ..

    https://puig.tv/en/tuning-motos/care...ield-upampdown

    but now I installed the original Can-AM Delux fairing ..
    Attached Images Attached Images
    Outlander fairing - Fox-shock - BajaRon Swaybar - Hankook tire/ back - 165/50 Imperial tires front & longer front shocks - GIVI Topase - Shad sidecases -heated grips - new seats

  17. #17
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default

    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

  18. #18
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default

    Thanks for the comment. Riders are really going to like this shield
    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

  19. #19
    Active Member
    Join Date
    Feb 2019
    Location
    England
    Posts
    269
    Spyder Garage
    0

    Default

    Hi chris56 sorry but it's pig ugly does nothing for the looks of Ryker. Best regards Nico 75

  20. #20
    Active Member
    Join Date
    Apr 2019
    Location
    OH
    Posts
    62
    Spyder Garage
    0

    Default

    I want to thank you, all, at F4 Customs, for the wonderful windshield, for my Ryker. You guys are great people and great to work with. I love my new Ryker windshield, which is displayed in your video. I highly recomend this windscreen to all.

  21. #21
    Very Active Member Markubis's Avatar
    Join Date
    Jan 2018
    Location
    NH
    Posts
    608
    Spyder Garage
    0

    Default

    Quote Originally Posted by Geo333 View Post
    I want to thank you, all, at F4 Customs, for the wonderful windshield, for my Ryker. You guys are great people and great to work with. I love my new Ryker windshield, which is displayed in your video. I highly recomend this windscreen to all.
    I'm glad you like it.
    I was disappointed with the video. It only shows it from one angle and it doesn't show how it gets adjusted or if it can even be adjusted easily.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •