For those of you that are required to have an annual state vehicle inspection where have you been putting the sticker on the Ryker? I really hate to put a sticker on the plastic parts.
For those of you that are required to have an annual state vehicle inspection where have you been putting the sticker on the Ryker? I really hate to put a sticker on the plastic parts.
I can't help you with that ( I have a 2014RTS-SE6 )but I am sure that someone who has a Ryker will chime in with the answer.
**** on my RTS-SE 6 my Vermont dealership placed the inspection sticker on the( sitting on the spyder facing the windshield) lower left side on plastic( near the front grill). It is visible. ****
Deanna
Last edited by Deanna777; 01-29-2019 at 10:54 AM.
Reason: added to post 1/29/2019 @ 10:47 a.m.
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
I dont have a ryker but a rts i live in pa and worked as a mechine all my life pa state law is a new vechile has to have a sticker in veiw but my delear didnt want to put a sticker on the one i bought, they said there mechine could do engines but not a pa sticker so they sent my bike out and that co put the sticker on the lower a frame no way is a cop going to see it, i dont want a sticker on the plastic.
Depends where the state wants you to put it. When we lived in Arkansas they wanted it above or below the plate, so I had something like the black one, sticker was just below the license plate. In In Missouri they wanted it in front, usually on the lower fork leg, but I had mine on a plate like the silver one below that attached to a bolt on the fork. It could go anywhere. Easy to make from a little aluminum sheet. Now Missouri says it just has to be on the bike, so it's on the inside of the saddlebag lid on the Harley. Missouri doesn't require inspections for the first 5 years of a new vehicle, so on the 2018 RTL I've got a few years before I have to worry about it.
I always wondered why the inspection sticker in the first place. In order to get the year tab to put on your license plate, you have to show proof of inspection. If you got the tab that means it has been inspected so why an additional sticker on the bike or ,(in Missouri) in the corner of the windshield on a car. I think some legislator has a relative in the sticker business.
2018 Can Am Spyder RT Limited, 2013 Triumph Bonneville T100
Motorcycle Rights: AMA Charter Life Member, MRF, FORR Life Member Local 11 Southwest Missouri, Mid-South MILE organizing committee member
2018 RT Limited , Got one, on, then off then on until Gloria decides if she likes it or not. blue
Check with your state DMV if it has to be visible & where, some do not. Here in Louisiana I can carry it with my registration paperwork in a bag somewhere dry & safe. Even in my wallet as long as I HAVE it if & when asked for it.
Going on our Air Force Base it has to be viewable & some buds have fabricated various devices on various bikes. I simply don't go on base till open house Air Show
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO