-
Active Member
My baby is Home
-
Sweet Ryde! What tour pack is that? cueman
-
Enjoy riding. I like the trunk. How
did you mount it? Add a pad on the
trunk and instant backrest.
-
Active Member
Originally Posted by cueman
Sweet Ryde! What tour pack is that? cueman
Thanks cueman that is a Givi v46 top case I just sat it on there to see how that looks it’s a hard case with light kit installed and it is a locking case it has a universal mount it looks like it will work out perfect
-
Originally Posted by Winnex3
Thanks cueman that is a Givi v46 top case I just sat it on there to see how that looks it’s a hard case with light kit installed and it is a locking case it has a universal mount it looks like it will work out perfect
Light kit/lock? If that works out for you, I'm ditching the LINQ case I just paid for and getting that or something that has similar features. I find with the top case attached though, it's harder for me to get on the bike.
-
Active Member
Originally Posted by WilliamTRyker
Light kit/lock? If that works out for you, I'm ditching the LINQ case I just paid for and getting that or something that has similar features. I find with the top case attached though, it's harder for me to get on the bike.
I bought two of these I put them on my motorcycles sold one of my bikes and the guy who bought the bike did not want the case so I kept it thinking this would work on the Ryker if not I would buy the one made for the Ryker but looks like this will work out perfect glad I waited the whole case can pop on and off with the push of a button once you mount the universal mount with a turn of the key you can lock the case and you can’t push the button to pop it off
-
Active Member
Another pic I couldn’t resist it looks so mean DA4BDDFD-9B9E-4322-89DE-880F63C6CB96.jpg. Looks like something off of Disney movie cars
-
Like the Givi Case on your Ryker.
Dean O
Gran Pa Hoon
Founder San Jose BMW
Builder of the Motorcyclist Cafe Barn and Bunkhouse
Alamogordo, NM
'20 Spyder F3 L
-
Very Active Member
Originally Posted by Winnex3
I bought two of these I put them on my motorcycles sold one of my bikes and the guy who bought the bike did not want the case so I kept it thinking this would work on the Ryker if not I would buy the one made for the Ryker but looks like this will work out perfect glad I waited the whole case can pop on and off with the push of a button once you mount the universal mount with a turn of the key you can lock the case and you can’t push the button to pop it off
Is the universal mount a GIVI part or is it from BRP?
-
Very Active Member
Nice looking ride. I bet you can't wait to get a bit of good weather and ride that machine. It may take a bit of imagination, but the Givi mount and case will fit pretty much anything. I cut and mounted a 3/4 inch piece of plywood to the Yamaha rack and then mounted the Givi mount to the plywood. Works great, trunk off or on in two seconds flat and the rack without the trunk is still usable. Stainless hardware, black paint, and you have to really look close to see it isn't a stock setup.
-
Very Active Member
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Active Member
Yup we got about 8-10” and still snowing
-
Active Member
Originally Posted by Navydad
Nice looking ride. I bet you can't wait to get a bit of good weather and ride that machine. It may take a bit of imagination, but the Givi mount and case will fit pretty much anything. I cut and mounted a 3/4 inch piece of plywood to the Yamaha rack and then mounted the Givi mount to the plywood. Works great, trunk off or on in two seconds flat and the rack without the trunk is still usable. Stainless hardware, black paint, and you have to really look close to see it isn't a stock setup.
yup they are very a very nice top case
-
Very Active Member
congratulations....🎉🎉🎉
And it looks good there... little chilly but home at last...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|