Results 1 to 12 of 12
  1. #1
    Active Member MeudtPG's Avatar
    Join Date
    Aug 2018
    Location
    Monroe, WI
    Posts
    51
    Spyder Garage
    0

    Default Longhorn LED mirror install pictures.

    Would like to please see fellow Spyder RT closeup pictures of installed led strips with Lamonster Longhorn LED kit. I will be installing soon and it appears they are fastened on the black towards the mirror side but next to the indent seam (not in the seam). Does the kit come with adhesive promoter too? Thanks

    2018 SPYDER RT LTD SE6 BLUE/CHROME

  2. #2
    Very Active Member Mazo EMS2's Avatar
    Join Date
    Jan 2015
    Location
    southern WI
    Posts
    1,472
    Spyder Garage
    1

    Default

    You are correct, they do not go in the seam. Some put them ahead of the seam, I've seen others behind the seam....I don't know that either way is better but others will chime in too. And yes, most of these light kits come with the promoter regardless of who ya buy em from

  3. #3
    Very Active Member samewok's Avatar
    Join Date
    Oct 2011
    Location
    Jacksonville,Ar
    Posts
    1,109
    Spyder Garage
    1

    Default

    they will come with very good instructions
    4" Stubby antenna,Rivco Flag Holder,Third brake light & Run brake and turn,mirror blinkers, cup holder, BRP 25 inch vented windshield ,Spyderpops Bumpskid with inlaid led, w/remote,Spyclops light,Eagle etching on windshield w/light,ground effects,trunk light,volt,meter&dual usb,Ultma seat w/gas door,sway bar&links,1330&Spyder decals,JT dash mount.
    Led head and fog lights

  4. #4
    Active Member MeudtPG's Avatar
    Join Date
    Aug 2018
    Location
    Monroe, WI
    Posts
    51
    Spyder Garage
    0

    Default

    Quote Originally Posted by Mazo EMS2 View Post
    You are correct, they do not go in the seam. Some put them ahead of the seam, I've seen others behind the seam....I don't know that either way is better but others will chime in too. And yes, most of these light kits come with the promoter regardless of who ya buy em from
    Hi Mazo! Thanks for the chime. Looking to meet and greet you when the salt is gone so think of a good food place in Arena/Mazo area.
    2018 SPYDER RT LTD SE6 BLUE/CHROME

  5. #5
    Member
    Join Date
    Aug 2009
    Location
    Cedar Park, TX
    Posts
    12
    Spyder Garage
    0

    Default

    The install is relatively easy. Takes longer to do all the Tupperware removal and reinstall than to hookup the lights. And yes there is 3M promoter included wth Lamonster’s kit. I just did mine after Christmas, sorry no pictures yet. Lamonster’s video is very helpful.

  6. #6
    Active Member Lin's Avatar
    Join Date
    Apr 2013
    Location
    Portsmouth, NH
    Posts
    457
    Spyder Garage
    1

    Default

    I remember I followed the instructions for placement and put them to the front side of the seam. I would reevaluate that if I were to do that again, as I would prefer to see more of them from the driver's position. They are just beyond the edge of my vision except for the inner ends. I'll take a picture later if you still want one.
    2016 RT-S Special Series

  7. #7
    Active Member MeudtPG's Avatar
    Join Date
    Aug 2018
    Location
    Monroe, WI
    Posts
    51
    Spyder Garage
    0

    Default

    Quote Originally Posted by Lin View Post
    I remember I followed the instructions for placement and put them to the front side of the seam. I would reevaluate that if I were to do that again, as I would prefer to see more of them from the driver's position. They are just beyond the edge of my vision except for the inner ends. I'll take a picture later if you still want one.
    Any pictures would be great. Thanks
    2018 SPYDER RT LTD SE6 BLUE/CHROME

  8. #8
    Active Member Lin's Avatar
    Join Date
    Apr 2013
    Location
    Portsmouth, NH
    Posts
    457
    Spyder Garage
    1

    Default Pictures of mine installed

    Photos 3 & 4 were taken at face level while I sat on the bike. Photo 1 is the right hand end and photo 2 is from underneath. So if I were to do this again, I'd move the led's a bit closer to the back of the bike.

    I hope this helps.

    Lin

    20190111_101313.jpg20190111_101249.jpg20190111_101130.jpg20190111_101052_Burst01.jpg
    2016 RT-S Special Series

  9. #9
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    2,819
    Spyder Garage
    1

    Default

    Great pictures Lin.Thank you very much. Why do you think moving them to the other side of the seam would be better?

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    Venture Riders
    TOI

  10. #10
    Very Active Member Mazo EMS2's Avatar
    Join Date
    Jan 2015
    Location
    southern WI
    Posts
    1,472
    Spyder Garage
    1

    Default

    Quote Originally Posted by MeudtPG View Post
    Hi Mazo! Thanks for the chime. Looking to meet and greet you when the salt is gone so think of a good food place in Arena/Mazo area.
    Heck yeah....no good food here in our neck of the woods but there's a few good ones between here and Monroe.

  11. #11
    Active Member Lin's Avatar
    Join Date
    Apr 2013
    Location
    Portsmouth, NH
    Posts
    457
    Spyder Garage
    1

    Default

    Quote Originally Posted by pegasus1300 View Post
    Great pictures Lin.Thank you very much. Why do you think moving them to the other side of the seam would be better?
    I stand corrected after seeing them again. By moving the installation point further towards the back, they would be visible from the driver's position. Part of the reason I bought them, was to have a secondary light for the turn indicator in addition to the dash. We all know the dash indicators are difficult to see.
    2016 RT-S Special Series

  12. #12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •