-
Wild hog
What is the belt tension for a 08 can am 990? Anybody know the torque setting for the front sprocket bolt.? Last, how is the 660 loctite applied to the gear & or bolt. Thanks guys &gals
-
Very Active Member
Little checking.....
According to the manual....
front sprocket bolt is 81 ft lbs 2008-2009 later models 92 ft lbs
Tension 450N +/- 150N ( we use the krickit and run 160 to 200 lbs, I keep it on the low side)
Thread lock on the bolt threads only
If you remove the front sprocket bolt it is recommended you install a new bolt (if ordered from BRP or Cheapcycleparts.com it will come with the thread lock already applied.
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Thanks a bunch . what a great site. Thanks again folks.
-
Very Active Member
Originally Posted by wild hog
What is the belt tension for a 08 can am 990? Anybody know the torque setting for the front sprocket bolt.? Last, how is the 660 loctite applied to the gear & or bolt. Thanks guys &gals
I kept my 08 GS on the loose side about 165lbs ….measured ON THE GROUND …. I never had any issues and I didn't feel any vibes ….. Mike
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|