Results 1 to 4 of 4

Thread: Wild hog

  1. #1
    Member
    Join Date
    Aug 2018
    Location
    meridian ID.
    Posts
    5
    Spyder Garage
    0

    Default Wild hog

    What is the belt tension for a 08 can am 990? Anybody know the torque setting for the front sprocket bolt.? Last, how is the 660 loctite applied to the gear & or bolt. Thanks guys &gals

  2. #2
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    29,679
    Spyder Garage
    1

    Default Little checking.....

    According to the manual....
    front sprocket bolt is 81 ft lbs 2008-2009 later models 92 ft lbs
    Tension 450N +/- 150N ( we use the krickit and run 160 to 200 lbs, I keep it on the low side)
    Thread lock on the bolt threads only

    If you remove the front sprocket bolt it is recommended you install a new bolt (if ordered from BRP or Cheapcycleparts.com it will come with the thread lock already applied.
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5

  3. #3
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    11,442
    Spyder Garage
    0

    Default

    Quote Originally Posted by wild hog View Post
    What is the belt tension for a 08 can am 990? Anybody know the torque setting for the front sprocket bolt.? Last, how is the 660 loctite applied to the gear & or bolt. Thanks guys &gals
    I kept my 08 GS on the loose side about 165lbs ….measured ON THE GROUND …. I never had any issues and I didn't feel any vibes ….. Mike

  4. #4
    Member
    Join Date
    Aug 2018
    Location
    meridian ID.
    Posts
    5
    Spyder Garage
    0

    Default

    Thanks a bunch . what a great site. Thanks again folks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •