-
Question about short reach bars for F3 Limited
With the short reach bars on an F3, are the grips closer together (bars narrower) in addition to being closer to the rider? If not, does anyone make a narrower set of bars for the F3?
-
Originally Posted by Slvrvalk1
With the short reach bars on an F3, are the grips closer together (bars narrower) in addition to being closer to the rider? If not, does anyone make a narrower set of bars for the F3?
I have BRP's short reach bars on my F3-T. I don't believe that they are any narrower than the standard bars.
Bert
-
I agree, don’t think my bars are any narrower than stock.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
Originally Posted by SpyderAnn01
I agree, don’t think my bars are any narrower than stock.
Plus Two on this!
2021 Sea To Sky, 2020 RTL
Isn't it weird that in AMERICA our flag and our culture offend so many people......
but our benefits don't?
-
Very Active Member
How much pullback are they than stock?
-
Very Active Member
My wife has the short reach handlebars on her f3L and they are very comfortable to ryde and control even though I am tall. If you are thinking they should be narrower, The narrower you make them the harder it is to steer around curves.
2017 F3 Limited
2017 F3 Limited , Lamonster Black Dymond brake pedal with brake rod at #5 Pure Magnesium Metallic
-
Very Active Member
IMG_0178.jpgIMG_0176.jpg Wife loves the shorter reach bars on her 16 F3T. Not any narrower, but about 2" closer. Gives better riding posture for the shorter ryder.
07 Shadows, Aero, Spirit gone but not forgotten
03 Harley Sportster, 07 RK moved on
11 RT- 76,000 mi, 15 RT-S- 44,000 mi, traded for current 15 base RT and 16 F3T
-
I wish I could find some that are 2"closer. I still am stretched out.
USAF MSgt, Retired
2018 F3 Intense Red
Squared Away Lasar alignment, TricLED Headlights, Foglights,Safety Bundle with Turn Module, BajaRon Sway Bar,Squared Away Mirror Wedges, Stebel Air Horn, Dash Turn Indicators, TricLED USA Flag
-
Originally Posted by rtotten
I wish I could find some that are 2"closer. I still am stretched out.
ROX makes a riser for the F3 it should give you 2" closer you need.
-
Very Active Member
Yep, Rox make risers in 2", 3.5" & 5". You should be able to find something that suites you.
-
Active Member
Originally Posted by bscrive
Yep, Rox make risers in 2", 3.5" & 5". You should be able to find something that suites you.
There is even a Rox riser in the 1-3/4" length that pivots, so you can rotate bars up or down as well as bring them closer.
https://www.revzilla.com/search?_utf...%2F4%22+x+1%22
[SIGPIC]
2017 F3 Ltd. Intense Red Pearl/Metallic Black topside
2017 F3Limited , lowered brake pedal Intense Red Pearl w. Metallic Black topside
-
Originally Posted by bushrat
There is one specifically for the F3 from ROX you should only use that one it is only a 2 inch rise. It is a pivoting riser.
-
Active Member
I have the 2 inch risers on my F3. If you get the 1 3/4 inch ones you won't be able to tighten down all the hardware. The 2 inch one barely gives you enough room. I had to change two of the mounting screws to hex bolts because you can't get the hex wrench directly into the screw head to tighten things. The 2 1/2 one would have worked better. Another thing to keep in mind is that you can't tighten the clamps down hard enough for the bars to keep them from slipping. I had to install an 8-32 screw through the clamp and bar to keep it from rotating. Works great and you don't notice it.
Life is attitude, be positive!
-
Active Member
All I know is that 1-3/4" risers would have worked on my 2017 F3L, except for fact that they would not clear the additional bracket mount BRP uses for centrally mounted GPS. I personally tried to fit them. If I didn't have GPS, or had a Ram mount on bars, the 1-3/4" risers would have fit, and worked. My risers were 1" diameter; that was the size my bars measured at. Maybe if you had a different size diameter, there could be problems trying to tighten. I have a riding club friend with a 2016 F3T who has been riding his Spyder for a year with 1-3/4" Rox risers, no problem. He went with shorter length because he didn't want to stretch his cables. But, yes, if you have a BRP GPS bracket mount, the bolts at top are longer, and 1-3/4" won't fit properly. I also couldn't find a metric allen key that would properly fit the BRP bolts, so I made my own. In the end, I simply decided I'll probably go with short reach bars, but haven't yet switched.
[SIGPIC]
2017 F3 Ltd. Intense Red Pearl/Metallic Black topside
2017 F3Limited , lowered brake pedal Intense Red Pearl w. Metallic Black topside
-
Just bought a set of 1R-P2PPK Rox Speed FX Elite Series Pivot Handlebar Riser 2in. - Black
Will let everyone know what they are like for my short wife's comfort.
eBay had them for $70.
Here's a good write up on them.
https://roxspeedfx.com/blogs/news/ad...n-am-spyder-f3
2016 F3 Spyder Limited SE6
2005 Honda ST1300 ABS
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|