|
-
USAF MSgt, Retired
2018 F3 Intense Red
Squared Away Lasar alignment, TricLED Headlights, Foglights,Safety Bundle with Turn Module, BajaRon Sway Bar,Squared Away Mirror Wedges, Stebel Air Horn, Dash Turn Indicators, TricLED USA Flag
-
Very Active Member
 Originally Posted by rtotten
Thanks Mike
Your welcome - We still don't know how many it takes ….but the nite is young  ...………. Mike
-
Watch this and you might change your mind. Be aware that you will have to let the CO2 out and replace with air. The CO2 will leak out quickly and the tire will most likely be flat the next day.
-
Very Active Member
Anyone know what brand/model bike that is in the video? BMW? You notice it has the same wheel hub nut on it the Ryker has. Wonder how available & expensive the tool is for it, if it is the same size?
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Ozzie Ozzie Ozzie
If you watch the Shawn Smoak vid about assembling a Ryker & the tools needed, you can see that while the BMW socket he tries in that is the correct 'size', it isn't anywhere near deep enough to reach the 'star' section & turn it due to the raised edge that the Rykers' safety 'C' Clip slots into!! 
So yeah, the vid Joel linked in post #28 is very likely showing a BMW wheel, but while their wheel sockets are essentially the same size, they simply WILL NOT fit the Rykers in any useable way! 
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
I picked up a CO2 kit from Cabelas for my quads, it came with a large CO2 cylinder and and adapter to mount to the tire. The proce was fairly cheap, I keep one oneach quad and one and two spare cylinders on the Spyder.
-
Very Active Member
Originally Posted by Peter Aawen
If you watch the Shawn Smoak vid about assembling a Ryker & the tools needed, you can see that while the BMW socket he tries in that is the correct 'size', it isn't anywhere near deep enough to reach the 'star' section & turn it due to the raised edge that the Rykers' safety 'C' Clip slots into!!
So yeah, the vid Joel linked in post #28 is very likely showing a BMW wheel, but while their wheel sockets are essentially the same size, they simply WILL NOT fit the Rykers in any useable way!
I don't think there's any way the tool Shawn has for a BMW would work on the nut we see in the video Joel links to for the same reason it didn't work for Shawn on the Ryker nut. So the bike in Joel's video must not be a BMW, or BMW has different configurations for its hub nuts.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
It is a Ducati Multistrada
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
