Jacking up the F3 S

[MrBones]

Need help finding the pictures of jack placement. Can't remember where they are. Know Lamonster posted some but all gone from memory
. At 85 guess thats to be expected. Want to remove front tires to have cars put on. Thanks for any help.

[PW2013STL]

Using my Sears atv/motorcycle lift I slide the two jack arms under the Spyder so that the rearward arm is just covering the rear of the main frame that runs down the center of the Spyder. I then jack it up and place car stands under each lower A arm. I than lower the Sears lift so that the Spyder rests on the jack stands.
Remember to loosen the lug nuts before raising the Spyder.

[MrBones]

Thanks PW sounds like its the same as my RSS.

[OK-DZ9R]

SwayBarInst-M.jpg

The extra piece on the lift was to get enough height to install the sway bar.

[MrBones]

Thanks OK good picture.