Page 12 of 12 FirstFirst ... 289101112
Results 276 to 295 of 295
  1. #276
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    No, just the T and Limited. And soon, the 2020 RT! I’m still working on a solution, my beta testers!!
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  2. #277
    Active Member
    Join Date
    Nov 2018
    Location
    Trinity, NC
    Posts
    65
    Spyder Garage
    0

    Default

    Finally got tired of mirror vibration and bought a set of these. All I can say is why did I wait so long. Did a 1450 miles trip last weekend in Southern Ohio and Kentucky, didn't have the first vibration!!! Awesome product.

    Bill

  3. #278
    Member
    Join Date
    Jul 2018
    Location
    Pasadena, MD
    Posts
    6
    Spyder Garage
    0

    Default

    Hey Joe,

    I just got my 2020 RTL and the left mirror is terrible. If you need another tester for the 2020 RT, I'm all in. Just PM me.

    I was going to use Lamont's threaded cap screw idea, but your solution seems easier.

  4. #279
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    We are at Deadwood. Next week, I’m back to working on a fix! Thanks for your patience.
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  5. #280
    Member
    Join Date
    Apr 2020
    Location
    Westfield, IN
    Posts
    18
    Spyder Garage
    0

    Default

    JavaDan,
    I also have a left mirror vibration issue on my 2020 RTL. What type of solution did Joe have to correct the problem? (I found the wedgies string of comments.) I did watch Lamonster's fix but would have to purchase the correct tap & died tool. I wonder what the difference is between the left and right mirror, the right mirror is fine. You would think that the construction and attachment would be exactly the same except in reverse (mirror imagine). Does BRP have a bulletin to fix the problem? Seems like the fix should be under the warranty. I have 2000 miles on my and will be taking it in for an oil change within the next month and will inquire about the mirror.

  6. #281
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    The more people who insist on a new mirror, the more BRP might take a look at a redesign. Meanwhile, the F3T and LTD has needed Wedgies for 5 years. We have hundreds of sets out, and they work. The solution for the RT is coming. I have to get home, first!
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  7. #282
    Active Member Tec35's Avatar
    Join Date
    Dec 2019
    Location
    Rhode Island
    Posts
    110
    Spyder Garage
    2

    Default

    Hi Joe

    I just bought a 2017 F3 Limited, I would like to order wedgies for my mirrors. I can't believe how much the mirrors vibrate/shake.
    2017 F3 limited , Black

  8. #283
    Very Active Member ulflyer's Avatar
    Join Date
    Jun 2011
    Location
    Near Lexington, NC
    Posts
    2,215
    Spyder Garage
    0

    Default

    Does the "wedgie" fix require removing the mirrors?
    Two Wheelers from 1963-2011

    Three Wheelers:
    2011 RT(Red)
    2014 RT(white)
    2016 F3T(red)
    2022 RT current ride(silver)
    __________________
    2016 Slingshot
    2018 Vanderhall
    2019 Slingshot

  9. #284
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    Pm me to order.
    No, the fix is simple; no mirrors get removed.
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  10. #285
    Active Member Tec35's Avatar
    Join Date
    Dec 2019
    Location
    Rhode Island
    Posts
    110
    Spyder Garage
    2

    Default

    Joe thank you! It was a quick/easy install for the wedgies and no more shaking. I can actually see the vehicles in the mirrors. Great product thanks again!
    2017 F3 limited , Black

  11. #286
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    Hi,
    Yes, just 1 screw. The cover just pulls off, then the screw. Very simple. Joe
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  12. #287
    Member
    Join Date
    Feb 2020
    Location
    North Carolina USA
    Posts
    3
    Spyder Garage
    0

    Default wedgies

    Quote Originally Posted by cptjam View Post
    Yes,
    we include pictures of the installation. We did a set today, and first had to dig out foam, double sided tape, and who knows what else! I’m really thinking we figured this out. Wedgie equipped Spyders now have thousands of miles on them, vibration free! Best $25 you can spend on a Spyder!! Joe

    How do i get these Joe? having a lot of shaking on my 2018 F3T

  13. #288
    Member
    Join Date
    Apr 2022
    Location
    AZ
    Posts
    1
    Spyder Garage
    0

    Default Request

    Hi Joe, I am in need of some of those wedgie I have a 2021 F3 Limited as well please email me and let me know what I need to do to get a set. Thank you
    cbtretired@gmail.com or I can be reach on 480-249-5558.

  14. #289
    Active Member chunkmonk's Avatar
    Join Date
    May 2022
    Location
    west virginia
    Posts
    103
    Spyder Garage
    1

    Default

    How about just posting the web site where we can see the product? Especially in this current climate, there are too many rabbit holes in the intar-web. Post up a few pics of the product, maybe a vid of you installing them on someone's bike, or something more tangible than "hey, spend $25 and you'll get this amazing product which we can't show you"... I get you want to keep overhead down, but I've seen enough cases of "vaporware" over time to know better than to buy something sight unseen - and it doesn't matter how many "satisfied customers" you get to bolster your claim - those are just as easy to fab up... I'm really interested to see this, because I have heard that the mirror issue does exist. I've also seen a few products that claim to put a stop to it. I have not experienced the issue, but if I can circumvent it for a little coin, I'll do it. But not without seeing it... Thanks.
    2021 F3 L , Stock Plugs (COILS, NOT WIRES!) Stock Brake Pedal Magma Red

  15. #290
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    9,515
    Spyder Garage
    0

    Default

    Hey chunkmonk, the Squared Away Team are out doing the BRP Spyder/Ryker Western Demo Tour, (in San Jose atm, I think?? Or was that last weekend?? ) so they might not be checking in on this thread all that often, so it's probably best that you just send a PM or email to cptjam, he's a long term vendor here on the Forum (the Black username is the give-away on that, just like the Green username is the give-away for Moderators ) - and there's little doubt these things are more than just 'vaporware', cos he IS STILL a vendor here!

    If you click on his username alongside any of his posts, you'll see the links for sending a PM (Private Message) or email; or if you go to the Forum Home Page & click on the Squared Away Logo in the list of Supporting Vendors, it's down towards the bottom of the page under the heading Spyder Performance & Suspension, that'll take you direct to the Supporting Vendors Forum & the Squared Away thread.
    2013 RT Ltd Pearl White

    Ryde More, Worry Less!

  16. #291
    Very Active Member rjinaz86323's Avatar
    Join Date
    Mar 2021
    Location
    Arizona high country
    Posts
    612
    Spyder Garage
    1

    Default

    Chunkmonk - I installed them on my '18 F3 Limited (only takes a few minutes) and they work like a charm.
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018 F3 Limited - Intense Red Pearl . . . . . . . . . . . . . . . . . . . . . . . . . . .

  17. #292
    Active Member
    Join Date
    Jan 2021
    Location
    northeast pa.
    Posts
    317
    Spyder Garage
    0

    Default

    i took 2 pieces of 1/4 x 1/4, 2 in. long foam and wedged them where its loose and fixed mine.
    2020 F3 limited, liquid titanium
    grip puppies
    Bajaron sway bar
    lamonster belt dampener
    battery tender
    19 in freedom tinted windshield
    matte black daytona frunk wrap
    Quadtrac 165/60's

  18. #293
    Active Member chunkmonk's Avatar
    Join Date
    May 2022
    Location
    west virginia
    Posts
    103
    Spyder Garage
    1

    Default

    Why don't you post a picture of what you installed so we can at least see the product since the vendor seems reluctant to do so?
    2021 F3 L , Stock Plugs (COILS, NOT WIRES!) Stock Brake Pedal Magma Red

  19. #294
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    9,515
    Spyder Garage
    0

    Default

    Quote Originally Posted by lugnut1009 View Post
    Bought a set for my wife for Christmas. When they came in the mail yesterday i was very surprised at how simple it is, and also realize why you can't find a picture of them anywhere. They would be too easy to reproduce / replicate at home. I was hoping for something more engineered, but if it fixes the issue it's worth it I reckon...
    Quote Originally Posted by TheCajun1957 View Post
    Got mine in! Went to install them and couldn't quite figure out where they went, might want to make a clearer pic on the instruction page.
    Saw the video and AH ha! thats where they go! Awesome product, no more bad vibes!!
    Quote Originally Posted by SpyderAnn01 View Post
    . It isn’t the easiest place to take a picture, black hole that’s why we did the video. Glad you like them
    Quote Originally Posted by cptjam View Post
    Nothing to see. A piece of HDPE. The size and shape and installation is what took quite a while to determine. Invisible once installed, except your mirrors are rock solid. I shared a picture last year, and my solution was promptly copied. You can work on your own solution, but doubtful you'll rack up tens of thousands of miles in testing, refinement, modification, fine tuning and then have a dozen strangers beta test it. You are welcome to try, or, buy a proven solution; The Wedgie!
    Quote Originally Posted by Nuke View Post
    For anyone that is on the fence about getting the wedgie, GET OFF THE FENCE AND GET A SET!!! If you think it's hard to install, YOU'RE WRONG! I made an install video to show how incredibly easy it is to install the Wedgie! You can view it here: Installing "The Wedgie" on a 2019 Can-Am Spyder F3 Limited. Now go support Joe and Ann and get your own wedgie! They just plain work.
    Quote Originally Posted by cptjam View Post
    We did a bunch at Red Rock Spyder ryde in this weekend. Had a guy tell us he copied my design! He was all set! While I did not slap him silly, I wanted to. It took a lot of trial and error to come up with a proper fix. Nuke was trying to help, publishing a you tube video, but the result was a guy stole my intellectual property, and was comfortable with being a thief. My designs are not public! I do try to help everyone , but I do run a business. I can’t afford to give away my solutions. If your mirrors shake, give me a call. You need a wedgie. A Squared Away wedgie. Thank you! Joe
    Chunkmonk, if you read the thread, you should realise TWO things -

    1. cptjam has explained exactly why they aren't too keen on supplying pictures, & that's without even mentioning the bad publicity their product might get from others selling sub-standard clones; and

    2. With over 250 posts in this thread alone, it's should be obvious that the members here who have bothered to try them are pretty much unanimous in thinking that these Wedgies are actually a value for money option/fix that quite simply just WORKS!

    So this leaves YOU with only two options -

    1. bite the bullet & buy a set of these things that everyone else thinks are well worth the $$ so you can make up your own mind about them; or

    2. just leave your mirrors vibrating away and stop harping on about anyone posting pics when it's already been explained why that isn't likely to happen!



    Enough already!
    Last edited by Peter Aawen; 05-26-2022 at 06:31 PM.
    2013 RT Ltd Pearl White

    Ryde More, Worry Less!

  20. #295
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    Wow, just saw this! Thanks, Pete! I’ve PMed Chunkmonk. Sorry to have caused such a problem! As Pete mentioned, I’m working for Can Am. SpyderAnn and I like to think we are honest and genuine. I suppose I could somehow create hundreds of satisfied customers (thousands, if you count our other things), and somehow insert “SquaredAway” in people’s signature. I just don’t know how. We just ride and fix Spyders. We appreciate all of our friends and clients. On this tour, every week, folks we met or worked with or rode with come out to see us. That’s how we roll!
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •