Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jul 2018
    Location
    North Carolina
    Posts
    10
    Spyder Garage
    0

    Default Help needed with installation of lamonster cup holder

    Hi!

    I purchased a Lamonster Ram mount for RT with self leveling cup holder. Has anyone else installed one of these? We are having a difficult time loosening the bolts to attach the mounting bracket. The bolts will not loosen. An ideas?

  2. #2
    Active Member guzzihack's Avatar
    Join Date
    Oct 2015
    Location
    Media, IL
    Posts
    132
    Spyder Garage
    1

    Default

    Those allen head handlebar bolts are seriously tight with a little loctite added. I used a hammer drive impact tool left over from my dirt bike days. Worked great on Phillips head case screws on Japanese bikes. A 1/4" impact with the correct size socket might break them loose too. I would be careful though and not round off the inside of the allen heads. Good luck.

    Coke
    2015 RT-S , RED/BLACK

  3. #3
    Member
    Join Date
    Jul 2018
    Location
    North Carolina
    Posts
    10
    Spyder Garage
    0

    Default

    Quote Originally Posted by guzzihack View Post
    Those allen head handlebar bolts are seriously tight with a little loctite added. I used a hammer drive impact tool left over from my dirt bike days. Worked great on Phillips head case screws on Japanese bikes. A 1/4" impact with the correct size socket might break them loose too. I would be careful though and not round off the inside of the allen heads. Good luck.

    Coke
    Thank you!

  4. #4
    Invalid Emails
    Join Date
    Oct 2015
    Location
    morgantown west virginia
    Posts
    618
    Spyder Garage
    0

    Default

    those allen heads are 7mm.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •