Side marker LED lights

[Psgavin]

Hi everybody,
I'm trying to add the rear red side reflectors with the LED upgrade. I have the light mounted but the instructions that came with the kit says to route the wiring "out the bottom" of the saddlebag. The only way I see to do that is to drill a hole in the back Shell of the saddlebag, am I being stupid and not seeing something? It also says to tap into a 5 wire connector behind the rear light but that connector is damn near impossible to get to.
Any hints from someone that has done this? I also plan on changing out the front fender side reflectors with LED.

Thanks for any answers.
Sean

[trikermutha]

If my memory serves me correctly I ran the wires out the hinge area for the saddle bags.

You have to remove the taillight to get to the wires you need. I didn't splice the harness but used this (Below) and then spice into those pigtails versus the bike harness.

http://store.valueaccessories.net/Sp...onnectors.aspx

If you dont use the turn signal feature on the front just use the two pin connector for the fender lights .

[Psgavin]

If my memory serves me correctly I ran the wires out the hinge area for the saddle bags.

You have to remove the taillight to get to the wires you need. I didn't splice the harness but used this (Below) and then spice into those pigtails versus the bike harness.

http://store.valueaccessories.net/Sp...onnectors.aspx

If you dont use the turn signal feature on the front just use the two pin connector for the fender lights .

Thanks! I'll get some of those connectors and figure out how to remove the rear light.