What kind of Cup holder do you have?

[Floridian2017]

What kind of cup holder do you have in your Spyder? I have a F3L. Where did you purchase from? If possible, please post a picture. Thank you

[NDrider]

I bought the one Lamonster has out but picked it up from spyder pops when they were in Deadwood SD. It comes with a awesome water bottle and my contigo coffee cup fits perfectly. So in the morning coffee then water bottle when I’m done. Look at Lamonsters site to see a short video. I love mine

[bhern]

http://www.spyderlovers.com/forums/s...ghlight=holder

[Floridian2017]

http://www.spyderlovers.com/forums/s...ghlight=holder

Thank you

[JP58]

Lamonsters is the best.

[Two cats]

We have a Kruzer Kaddy 750 my wife got on Amazon. It cost $39.95 with free shipping . I love mine. It has 2 different inserts for what ever size drink you have. What ever you put in it there is where it stays.

[cybrj]

https://www.drink2go.com/products/spyder-f3-cup-holder
Works great, 1 screw out and one screw in with sticky washer.
No tipping and you can use a hair dryer or a heat gun to adjust the arms.
Under $20
Jim

[NorthAlabamaSpyder]

I use the Python mount from Butler with a Yeti 32 oz tumbler in it.

[Bigmo]

Lamonsters is the best.

Designed to hold a 32oz foam cup from any gas station. Used an old Buttler ring, everything else home made.Drink Holder Detail 1.jpg

[Inflatableman]

Lamonster F3 Spyder Cuff with accessories, cup holder and two ram balls. Yeti 30oz is tight getting out, 20 oz fits perfectly.



20180905_151620.jpgRam Mount wih cup holder.jpgRam with 30oz .jpg

[Lamonster]

Some options we sell

http://www.lamonstergarage.com/can-a...der-lamonster/



http://www.lamonstergarage.com/f3-ha...der-lamonster/
https://youtu.be/Yp3_DyIlRp8

http://www.lamonstergarage.com/f3-ha...der-lamonster/

[bcer960]

https://www.drink2go.com/products/spyder-f3-cup-holder
Works great, 1 screw out and one screw in with sticky washer.
No tipping and you can use a hair dryer or a heat gun to adjust the arms.
Under $20
Jim

+1 on these, easy to install and work great.

Ray

[jlc41]

Just installed Lamonster frame mount cup holder very clean easy install one bolt R & R.Trike Drink Holder.jpg
Don't know why pic is side ways, sorry.

[lugnut1009]

Wanted to share our cup holder, didn't want to make a whole new thread for it. We bought a cup holder form Ciro 3d, the big ass drink holder and the universal mount they sell. Mounted it on the large bar in front of your knee and it works great! Holds anything from a small bottle of water to a large yeti style cup.

Here is a review from youtube that I watched and wanted the holder. Got one for my wife's F3L and one for my Indian Springfield: ASR rides

Kim

[lugnut1009]

Oh, we were testing her new Lamonster Freedom shield 17" before we took the plastic off....

[RICZ]

What's you opinion of that 17" windshield? Inquiring minds want to know.

[Motorcycledave]

What kind of cup holder do you have in your Spyder? I have a F3L. Where did you purchase from? If possible, please post a picture. Thank you

www.drink2go.com

[lugnut1009]

What's you opinion of that 17" windshield? Inquiring minds want to know.

My wife likes it. We went for a little ride on the interstate at 70mph and she said she can tell it has way more protection than stock shield. Next weekend we are supposed to take a weekend trip and should have a really good review of it by then.

[grumpyoldretiredcop]

Generic bicycle water bottle holder attached to a RAM mount that is bolted to Lamont's handlebar top cap. I've used the same or very similar setup for years on different bikes.

[ozarkryder]

We use Bubba Hero Sport Bottles, either 16, 20 or 24 oz. - we have a few of each size. The Sport Bottle version has a flip-up straw that seals the bottle when closed, and with a straw I don't have to tip it up blocking sightlines when hydrating as we ride. Cold drink and 5 regular size square ice cubes go in the bottle, and here in the Ozarks at 90°F there is still ice gas stop to gas stop. (About 200 miles on the Goldwing trike, haven't done distance in hot weather on the RTL yet)
I have a Lamonster Spyder Cuff with Ram balls to which I mount mine, Gloria's mounts to the rear handhold with a Ram tough claw. I made some cup holders for the Bubba Bottles from 3 1/2" PVC pipe and nylon webbing from Wallyworld - black gear strap from the sporting goods and the pink webbing from a dog leash. Pics below are from the Goldwing, but they go on the Spyder the same way.

[RICZ]

My wife likes it. We went for a little ride on the interstate at 70mph and she said she can tell it has way more protection than stock shield. Next weekend we are supposed to take a weekend trip and should have a really good review of it by then.

Thank you for that reply. One more question -- How tall is your wife and is she long or short in the torso? I'm researching for my accessory windshield.

[lugnut1009]

Thank you for that reply. One more question -- How tall is your wife and is she long or short in the torso? I'm researching for my accessory windshield.

She is only 5’3”, I’d say she is average on the torso. Looking directly at her it looks like the top of the shield is just below her eyes.

[RICZ]

She is only 5’3”, I’d say she is average on the torso. Looking directly at her it looks like the top of the shield is just below her eyes.

Hmm...being 5'-10" and shrinking, I might have to consider a taller windshield. Thanks for your help.

[Rattlebars]

I have one of these...

mounted on my left bar. I'm a minimalist so I don't like a bunch of hangy stuff on it cluttering up my space. I use a Polar >CLICK ME< bottle with it. GPS mount is Minimal as well. Minimal.





>CLICK ME< for details.

[Mikark]

Sorry I see this was posted along time ago. I'm a little late to the game. I've been searching for a drink holder and came across your idea. I'm the same way I don't like things hanging from my handlebars. I have a 2018 F3T. Where did you buy this setup. I looked on Amazon couldn't find it. Does the clamp open to 2"? I have seen others but I like the clamp easy on easy off.

Thanks
Mike