-
Active Member
Passenger Backrest Install
I'm in the process of installing a passenger backrest on my 2014 RSS, and I'm having difficulty sliding the receiver into the frame channel. Was wondering if anyone had a similar experience, or did I just get a reject of a part. I was thinking of maybe grinding down the receiver a bit, what do you Spyder folks think? I've attached some pics of what I mean. Much thanks, Joe
IMG_9026.jpgIMG_9025.jpgIMG_9011.jpg
Last edited by jtonga; 07-30-2018 at 12:28 AM.
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Active Member
Originally Posted by Bfromla
If OEM it should fit just fine maybe require a bump or two but not grinding or shaving unless is in the instructions with proper locations looking at the pics I see what looks like wire loom holders pressed thru on 3 sides. They may simply need pushed out till receiver is mounted then put back in again should be in the instructions
Thanks for the input. I thought it was getting caught up on the wire holders too but it doesn't even make it in that far. The slide receiver won't clear the (not sure the name of the part) the piece just before the frame channel. I might just try hammering it in with a rubber mallet? Thanks again
IMG_9032.jpg
Last edited by jtonga; 07-30-2018 at 11:22 AM.
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Active Member
Update
Last edited by jtonga; 08-11-2018 at 12:44 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|