|
-
Very Active Member
 Handlebar slipping with Rox Risers Help
I installed the Rox risers on my 2018 F3L and I cant get them tight enough to stop slipping. There in no knurling on the handlebars. The bars want to slip with average pressure on them. I tried a prick punch and hammer to mar the inside surface. Didn't help. What now any advice would be helpful.
-
Very Active Member
RISERS
 Originally Posted by JP58
I installed the Rox risers on my 2018 F3L and I cant get them tight enough to stop slipping. There in no knurling on the handlebars. The bars want to slip with average pressure on them. I tried a prick punch and hammer to mar the inside surface. Didn't help. What now any advice would be helpful.
I can't speak directly about the ROX brand ....but when I bought risers from " RSI " they sent shims because all handlebars are not the same size ......How close to the exact diameter is the ROX brand...... di you get SHIMS ??? .........Mike  ..........PS.... PM Prairie Spyder ( Patti ) I'm pretty sure She has them on Her F-3
-
Very Active Member
No shims. I may have to make some. A friend said use pop can to make shims.
-
Active Member
Wet-N-Dry emery / sand paper works well in the bar clamp.....
2017 F3s-Daytona...After market top-box,- Diy Sports rack,- Diy Windshield & brackets - Sena 20s,- Shad side cases,- Drivers backrest,- 660 Garmin,- Altimate floor boards, - Diy Belt Guard, - Sinister Exhaust,
-
SpyderLovers Sponsor
Two options
Return the them; mine don’t slip.
set your bars where you want them, drill through, put a screw in. They won't move.
Your call.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Active Member
!0-4 on Wet-N-Dry emery / sand paper.
Joe
-
Very Active Member
 I'm confused,the U FIT system didn't fit or you just wanted something different? Glad you found a fix
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Originally Posted by Bfromla
I'm confused,the U FIT system didn't fit or you just wanted something different? Glad you found a fix
Rox Risers will give you more adjustability because you have 2 pivot points. You can move the riser up or down and the handlebar up and down till you have the right fit.
-
The only time my handlebars slipped after the Rox risers were installed was when Cruzr Joe sat on my F3T and then used them to pull himself up. Maybe they would slip if it really leaned on them, but I try to push up from my feet instead.
-
 He broke your bike?!?
Give my Attorneys a call:
My Legal Team.jpg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
