-
I bought a factory trunk to put on my 2017 F3T. It has the same issue, so far not a problem as long as I make sure that the lid tabs align with the trunk body when closing the lid. I will say that I have owned many motorcycles over the years that had trunks/tour packs and the F3 trunk lid is the flimsiest piece of poo I've ever seen... even worse than the frunk lid, which is no prize either.
-
Active Member
Hi.
When I received the 2018 F3 Ltd in January I had some problems with the unit and BRP decided to change it.
The first unit had the problem with the trunk but not the second one. So, could be an assembly problem?
Now the only minor problem I have (speaking about storage) is that sometimes the lid of the console compartment
opens. I'm experimenting with solutions such as tightening the spring and adding an extra washer to lower the stud.
-
Ricz, I looked at it myself thinking the same. No adjustment. I guess the trunk lid material is so thin that it cannot hold its shape and it flops around like a wet noodle. I was even thinking about gluing in some kind of reinforcement on the underside of the lid.
2018 Spyder F3 Limited
Pearl white/dark
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|