-
Helmet clip
Here's the drawing: Helmet clip 2 drawing.pdfHelmet clip 2 drawing.pdfhelmet clip 2 drawing.jpg
I did make a change to make the bar 1.625 rather than 1.5.
-
Gee... it just seems easier to buy a set of Lidlox, and be done with it?
-
Thanx for the drawing ..I like to tinker!
-
Easy
Originally Posted by Bob Denman
Gee... it just seems easier to buy a set of Lidlox, and be done with it?
Not when you have a milling machine in the garage and a supply of stainless. I think I spent about 30 minutes on the CAD and 30 minutes to make them. Also we retirees have to have projects and I already made the backing plates for the boat, modified the stainless cooler lid hinges for the formica lid step that had to be bent 90 deg with the heat gun, put a new motor assembly in the solar vent, added stainless eyebolts for the outboard stablizing strap, made new ladder steps ....
There's nothing quite like buying a hunk of stainless or aluminum and turning it into something.
-
Originally Posted by JFD
you mean the end 1.69" ?
-
-
Lidlox $$$$$$$$$ these 0 nothin naddah zilch fun time in the shop!!
-
Very Active Member
Originally Posted by JFD
Looks good. How does it work?
-
-
SpyderLovers Sponsor
-
Very Active Member
Originally Posted by JFD
Not when you have a milling machine in the garage and a supply of stainless. I think I spent about 30 minutes on the CAD and 30 minutes to make them. Also we retirees have to have projects and I already made the backing plates for the boat, modified the stainless cooler lid hinges for the formica lid step that had to be bent 90 deg with the heat gun, put a new motor assembly in the solar vent, added stainless eyebolts for the outboard stablizing strap, made new ladder steps ....
There's nothing quite like buying a hunk of stainless or aluminum and turning it into something.
How much for you to make me two of these clips mailed to 04222?? Spin some up, I have five other friends that may like some also!! Shoot me off a P.M
-
Congrats....
Well done...love the do-it-yourself guys. I love doing stuff myself even knowing that I could have had or bought it cheaper and faster. There is that special satisfaction when you stand back and see your work done....
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Me too!
Love tinkering and making stuff. Like my rail mounted cup holder, after seeing LaMonster's new one. Cost me nowt, took a couple of hours in the shop.
-
OK that's weird
Originally Posted by wilpir
you mean the end 1.69" ?
I tried adding the new drawing and it would'nt but then it did I guess.
Yes, I forgot I already added a 1/16 and so added it again. It only needs to be 1.625, although 1.69 won't hurt anything.
-
Like this
Originally Posted by wyliec
Looks good. How does it work?
DSCF8032.jpgDSCF8034.jpgDSCF8036.jpgDSCF8042.jpg
Slips over the clip under the seat and the seat locks it.
-
Very Active Member
Originally Posted by JFD
Thanks. After looking more into this this afternoon, I realized there's a clip on the RT, and I have a GS.
-
Originally Posted by wyliec
Thanks. After looking more into this this afternoon, I realized there's a clip on the RT, and I have a GS.
No clip on the ST either...
Suppose I could put in a couple of flat-head screws???
-
lidlock.jpg
!0 min to program
2 min to cut
Thanks JFD
-
-
Helmet clip
Originally Posted by Zip
Nicely done!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|