-
Active Member
TRICLED Fender
Finally got around to replacing the fender reflectors with the TRICLED led fender lights. IMO this is a simple yet very effective safety farkle. Can't have to many lights. TRICLEDs instructions are well written. Completed this install while
drinking coffee in about 1.5 hours if your are in a hurry I believe you could cut that time some.
TricLed.jpg
Last edited by Chasinsparks; 07-15-2018 at 11:08 AM.
-
Active Member
Well done! And it is a good choice.
Ride safe!
-
-
Active Member
Originally Posted by Chasinsparks
Finally got around to replacing the fender reflectors with the TRICLED led fender lights. IMO this is a simple yet very effective safety farkle. Can't have to many lights. TRICLEDs instructions are well written. Completed this install while
drinking coffee in about 1.5 hours if your are in a hurry I believe you could cut that time some.
TricLed.jpg
Do you have any pics of the wiring? I'm torn between this one and the one from Lamonster. Lamonster has the plug and play OEM style harness, and Tricled has the actual reflectors plus lights in them, but i'm worried the Tricled wiring isn't as easy.
2020 Can Am Spyder RT Limited "The Comet #2"
Baja Ron Sway Bar
Passenger Armrests From Can Am
Wolo Big Bad Max Airhorn
Lamonster Top Cuff W/Ram Ball
Lamonster Power Plate
Tackform Phone Mount
Key Cover from Ebay
Lamonster Mirror Locks
Ultragard Cover from Lamonster
Top Grills from Spyderpops
Garage Door Opener from Spyderpops
3.5mm Extension from Amazon
Lamonster USB Cable Holder & Cable
Foam Grips from Spyderpops
Tricled Strobe Brake Light module
Tricled Bag Lights (replace reflectors)
Tricled Turn/Brake/Run Signals Rear
Tricled Floorboard Lights
Tricled Sequential Run/Turn Fender Lights
Tricled A-Frame Run/Turn Lights
Tricled LED American Flag Mount & Flag
Showchrome American Flag
-
Very Active Member
I had put them on my ST. The wiring is easy as it just taps into the lights at the front of the fender (assuming you don't want them to blink or anything; I didn't.)
However, the taps resulted in the top of the fender not fitting as well as I would like it to. I took it apart again and soldered the connections right into the BRP wires, along with liquid electrical tape and shrink wrap tubing around the splices. Now the top of the fender fits the way it's supposed to.
Now I just hope Tricled can come up with something for the 2019 models.
Trb-- (Roger)
2014 Cognac STL:Ultimate Seat, Nelson Rigg Tail Pack, Nelson Rigg RS/ST Half Cover, TL fender lights, Squared Away Laser Alignment, BajaRon sway bar and links, Akropovic Sport Silencer
2022 White Pearl F3T
Gone but not forgotten: 2019 F3S Special Series Liquid Titanium
Spyder States Visited
-
Active Member
Originally Posted by Trbayth
I had put them on my ST. The wiring is easy as it just taps into the lights at the front of the fender (assuming you don't want them to blink or anything; I didn't.)
However, the taps resulted in the top of the fender not fitting as well as I would like it to. I took it apart again and soldered the connections right into the BRP wires, along with liquid electrical tape and shrink wrap tubing around the splices. Now the top of the fender fits the way it's supposed to.
Now I just hope Tricled can come up with something for the 2019 models.
Thanks, I think you just made up my mind for me.
2020 Can Am Spyder RT Limited "The Comet #2"
Baja Ron Sway Bar
Passenger Armrests From Can Am
Wolo Big Bad Max Airhorn
Lamonster Top Cuff W/Ram Ball
Lamonster Power Plate
Tackform Phone Mount
Key Cover from Ebay
Lamonster Mirror Locks
Ultragard Cover from Lamonster
Top Grills from Spyderpops
Garage Door Opener from Spyderpops
3.5mm Extension from Amazon
Lamonster USB Cable Holder & Cable
Foam Grips from Spyderpops
Tricled Strobe Brake Light module
Tricled Bag Lights (replace reflectors)
Tricled Turn/Brake/Run Signals Rear
Tricled Floorboard Lights
Tricled Sequential Run/Turn Fender Lights
Tricled A-Frame Run/Turn Lights
Tricled LED American Flag Mount & Flag
Showchrome American Flag
-
I would opt for turn signal as well it makes a huge difference, i tested riding behind a spyder with and whithout, but at minium just having the led for the fender its a great safety upgrade.
2015 Canam Spyder F3-S SE6
Detachable Passenger backrest #219400703
Gauge Spoiler #219400531
Blue Ridge Windshield #219400746
Hood stripes decal kit #219400711
F3 Idler Pulley #219800431 / Lamonster roller upgrade
Bajaron SwayBar
Elka Stage 2 rear shock
Arc LED fog lights
Lamonster F3 bar clamp with Quad-lock phone mount
Foam Hand Grip Covers
Tufskinz Peel & Stick Tank Protector Pad (Glossy doomed carbon)
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Very nice. I am thinking if we keep our current models, both should have some more front lighting. We are starting to go on "dusk" rides, and I like to be seen.
Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.
Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)
MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles
IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
-
Active Member
i do not have any pics as this was about a year ago. This install is super easy including the wiring.
-
Active Member
Really makes a big difference, with the LED bump skid, fender and a arm lights Ray Charles can see me coming down the road.
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Love the looks of that fender, wish my 2012 had them!!
-
Active Member
Originally Posted by Mikey
Love the looks of that fender, wish my 2012 had them!!
Mikey, you can add lights to your fender as well. You can add LED's to the channel on the fender and change the side and rear fender reflectors to lighted ones. TricLed and Custom Dynamics should sell them.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|