-
I need handlebar risers
-
Very Active Member
Originally Posted by Edmunq1337
For 2008 gs sm5
Here you go. Little pricey but well made/
https://rivcoproducts.com/shop/can-a...and-gs-models/
Or buy some 4" dog bone risers and make you own. That is the route I took.
https://www.ebay.com/itm/NOS-1970s-D...QAAOSwj0NUgK8g
If you need any info on building them yourself give me a hollow and I might can give something to help you do it.
David
-
To the OP
What kind of riser do you need/want?
Cut or no-cut? No cut blocks give you 1"-2" rise without cutting your bars to pieces, and can re-use your stock control cables. Cut ones require you to permanently cut your handlebars and *may* require longer cables.
How much rise and / or how much reach back do you need?
If you can find them used, Heli-bar risers are no-cut and give you 2" up and 4" back.
Can Am riser blocks are still available if you only need a little rise.
https://www.ebay.com/bhp/can-am-spyder-riser
Last edited by asp125; 06-29-2018 at 07:34 AM.
When life throws you curves, aim for the apex
Current stable: 09 Thruxton / 09 FZ6
Sold List: 97 Ninja500R, 03 SV650K3, 01 Ducati 750Sport Dark, 73 CB350/4, 03 F650GSA, 08 Gixxer600, 03 Gixxer600, 91 VFR750F, 09 KLX250, 06 Thruxton 900, 08 Spyder RS , 12 Street TripleR, 15 RC390, 02 VFR800, 09 KLX250S, 10 F650GS
JLohPhotos
... Motorcycles are kind of like Baskin Robbins... You're looking at 31 flavors of ice cream, don't you kind of want to know what they all taste like?...
-
Very Active Member
Originally Posted by asp125
What kind of riser do you need/want?
Cut or no-cut? No cut blocks give you 1"-2" rise without cutting your bars to pieces, and can re-use your stock control cables. Cut ones require you to permanently cut your handlebars and *may* require longer cables.
How much rise and / or how much reach back do you need?
If you can find them used, Heli-bar risers are no-cut and give you 2" up and 4" back.
Can Am riser blocks are still available if you only need a little rise.
https://www.ebay.com/bhp/can-am-spyder-riser
I ended up using a block along with the dog bone risers.
David
-
We used the Helibar option. I can't recall if I also used a riser block. I'll have to check the spare parts bin.
When life throws you curves, aim for the apex
Current stable: 09 Thruxton / 09 FZ6
Sold List: 97 Ninja500R, 03 SV650K3, 01 Ducati 750Sport Dark, 73 CB350/4, 03 F650GSA, 08 Gixxer600, 03 Gixxer600, 91 VFR750F, 09 KLX250, 06 Thruxton 900, 08 Spyder RS , 12 Street TripleR, 15 RC390, 02 VFR800, 09 KLX250S, 10 F650GS
JLohPhotos
... Motorcycles are kind of like Baskin Robbins... You're looking at 31 flavors of ice cream, don't you kind of want to know what they all taste like?...
-
Originally Posted by Warlock
I used these, no cable issues, there was enough slack.
Incredible riding difference on my 2012 RS-S, arms and neck are thanking me.
-
Very Active Member
I used Helibar 5" risers on my 2009 RS. Don't know if they still make them but I loved the diff. they made. Had enough cable to go 5" up and 2" back. You can see how I sat if you go to my website.
Ride in comfort,
John
-
What are easyest 3-4”risers to install cost is not an issue
-
Very Active Member
Originally Posted by Edmunq1337
What are easyest 3-4”risers to install cost is not an issue
The Rivco ones. Not bad to put on at all.
David
-
Originally Posted by Warlock
Ordered
-
SpyderLovers Sponsor
-
Originally Posted by Motorcycledave
I have what you want just call me, 209-887-3283
Ride Safe
Dave
I already odered some. Ya got any seats with front rider back reat for 2008 gs?.
-
Evening.
I am looking for a no-cut riser for 2012 RS S SE5
Are they still available?
-
Member
Looking for no cut riser for 08 GS SM5
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|