-
Active Member
Pairing Scala rider TeamSet Pro
2018 RTL and older bluetooth Scala TeamSet Pro headset. Headset pairs with iPhone 6S, but I cannot get the headset to pair with the bike. Has anyone successfully paired an older Scala with BPR Connect?
-
-
Active Member
-
-
You can’t be paired to the phone AND the bike. Remove the headset from the phone and then try pairing to the bike. You will be pairing to the phone but through the bike’s system. Make sure all other Bluetooth devices are off (or the BT is off).
-
Active Member
Originally Posted by Flamewinger
You can’t be paired to the phone AND the bike. Remove the headset from the phone and then try pairing to the bike. You will be pairing to the phone but through the bike’s system. Make sure all other Bluetooth devices are off (or the BT is off).
I tried this, no luck. Thanks for the suggestion.
-
I’m hearing that the Schubert helmet is not pairing. Have you updated the firmware on the headset. Also there is a software update for the bike that might help.
I had had to try several,times and make sure to reset the phones and bike. If it doesn’t pair after half a dozen attempts, all I can think of is it’s time for a new headset.
-
Active Member
Originally Posted by Flamewinger
I’m hearing that the Schubert helmet is not pairing. Have you updated the firmware on the headset. Also there is a software update for the bike that might help.
I had had to try several,times and make sure to reset the phones and bike. If it doesn’t pair after half a dozen attempts, all I can think of is it’s time for a new headset.
I've pretty much come to this conclusion, and I hate to spend that much money on something that will get so little use. I'll have to think about this for a while.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|