-
Promotional Vibration Damper Sale
We are running a promotional sale to build up our Ebay customers and there is no reason that everyone that wants to can't get this bargain. Not sure how long we will run this, but if you want to SMOOTH out your Ryde, best way to do so.
RT Link:
https://www.ebay.com/itm/12306187359...84.m1555.l2649
F3 Link:
https://www.ebay.com/itm/12306187012...84.m1555.l2649
-
-
Very Active Member
The SmoothSpyder tensioner I have is still working fine, otherwise I'd jump on this deal! The SmoothSpyder tensioner for the RT is out of stock so this is a great, probably even the best, alternative. Comments posted here over the past year or so indicate the other two alternatives aren't as good.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Originally Posted by Roadster Renovations
Couldn't pass that up. Just ordered one for my 2015 RT-S SE6.
-
-
Very Active Member
Perfect timing for me for once! My BRP unit is still going along fine but I told myself if yours ever went on sale I would bag one for when the time comes. DONE & DONE!
'15 F3-S Pure Magnesium Metallic - Mad Max Edition
'15 Mclaren 650S Coupe - Aurora Blue
"You Were Really Flyin', When I Passed You Back There!"
Chuck
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
-
Very Active Member
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Very Active Member
I checked the fit with the EBay app and it said it would not fit my 2011 RTS. I checked further and found it would only fit 2014 and above. Is that correct?
2011 RTS (Sold to a very nice lady)
1998 Honda Valkyrie
2006 Mustang GT. Varooooom!
US Navy Veteran
SC Law Enforcement Boat Captain
CNC Machine Service Technician
President: Rolling Thunder SC1
Member: Disabled American Veterans, Rock Hill, SC
Member: American Legion
Experience is recognizing the same mistake every time you make it!
-
Hey....
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
The best substitute for brains & knowledge is....................silence.
-
Originally Posted by Grandpot
I checked the fit with the EBay app and it said it would not fit my 2011 RTS. I checked further and found it would only fit 2014 and above. Is that correct?
It will fit, but the 2013 and under RT has that ribbed outer belt. It sounds a little like a turbo when you slow down. Some ryders aren't bothered, others are. We have a kit #3 BB on our regular site, but it is not part of this promotion.
What we can do is invoice you for the Ebay price plus $10 with the Buzz Buster roller. The ebay shipping is $15.80. The total would be $190.80 and would include the $10. That is $30 off of the website price. Here is where you can give me your email. Anyone that has a '13 and under RT that wants to do this, can.
https://www.roadsterrenovations.info/contact
Last edited by Roadster Renovations; 05-04-2018 at 07:23 PM.
-
Very Active Member
now us old owners need a parts promo to stock up on another roller and spring .
2015 rts-white pearl- mods- '16 F3 fat 6 chrome wheels,
and some little stuff. setback utopia backrest, baja ron
sway bar, oem adj. air deflectors, marlin gps compass,
lamonster fbb foot pegs[modified brackets], lamonts
vibration damper, rock guard, and side case stiffener kit,
. brp comfort seat. , fomozas and
altimax, magic mirror mts, and wide mirrors.
[joyce & irvin toms]
-
Originally Posted by irvin48
now us old owners need a parts promo to stock up on another roller and spring .
Heck, I'm thinking of putting the 40k roller and bearings back in to service that we pulled off of Buckeye Chuck's byke. The roller had a little scoring so we put him a new one when we did the upgrades. I have made a jig to turn the rollers with the bearings in place down .001 at a time. Nice clean finish. I'll probably video the project and log the mileage. We'll see if w can get 100k plus out of it.
To my knowledge, this last batch of beefed up springs are lasting well. Think we finally made them strong enough.
I will pass your request on to upper management.
-
Awesome, just ordered. Glad I waited a bit.
-
another one sold
just 2hrs ago i also ordered one for my 2017 rt.
-
My BRP tensioner is bad! Good timing,new one is on the way.Thanks.
-
Very Active Member
Originally Posted by Roadster Renovations
It will fit, but the 2013 and under RT has that ribbed outer belt. It sounds a little like a turbo when you slow down. Some ryders aren't bothered, others are. We have a kit #3 BB on our regular site, but it is not part of this promotion.
What we can do is invoice you for the Ebay price plus $10 with the Buzz Buster roller. The ebay shipping is $15.80. The total would be $190.80 and would include the $10. That is $30 off of the website price. Here is where you can give me your email. Anyone that has a '13 and under RT that wants to do this, can.
https://www.roadsterrenovations.info/contact
Message sent through your site.
2011 RTS (Sold to a very nice lady)
1998 Honda Valkyrie
2006 Mustang GT. Varooooom!
US Navy Veteran
SC Law Enforcement Boat Captain
CNC Machine Service Technician
President: Rolling Thunder SC1
Member: Disabled American Veterans, Rock Hill, SC
Member: American Legion
Experience is recognizing the same mistake every time you make it!
-
Here is a link to the on line instructions if anyone is wanting to know the install procedure. Enjoy!
https://roadsterrenovations.wordpress.com/
-
Installed mine today, the alignment tool was a plus. A bit concerned about using the red loctite, after installation it occurred to me, what if I need to replace a spring someday. How difficult will it be to remove the bolts. Made me wonder if I should have used the blue loctite in my tool box.....
-
Originally Posted by Candoman
Installed mine today, the alignment tool was a plus. A bit concerned about using the red loctite, after installation it occurred to me, what if I need to replace a spring someday. How difficult will it be to remove the bolts. Made me wonder if I should have used the blue loctite in my tool box.....
The red will come loose much easier than the gorilla snot BRP uses. You will be fine!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|