Results 1 to 6 of 6
  1. #1
    Active Member jcaburto's Avatar
    Join Date
    Jan 2017
    Location
    Whittier, Ca
    Posts
    142
    Spyder Garage
    1

    Default USB Port for passenger

    Has anyone installed a USB port on the passenger side? Maybe on the inner part of the speakers?
    I have the one above the glove compartment but wouldn’t it make sense to have one for the passenger too?
    Julio Aburto



    Black Currant 2013 Can-Am Spyder RT Limited

    2013 RTL , Black Currant

  2. #2
    Active Member jcaburto's Avatar
    Join Date
    Jan 2017
    Location
    Whittier, Ca
    Posts
    142
    Spyder Garage
    1
    Julio Aburto



    Black Currant 2013 Can-Am Spyder RT Limited

    2013 RTL , Black Currant

  3. #3
    Very Active Member Mazo EMS2's Avatar
    Join Date
    Jan 2015
    Location
    southern WI
    Posts
    2,051
    Spyder Garage
    1

    Default

    My wife just uses the the outlet in the trunk. Then when not using the cord, just coils it up and tucks it beside the speaker
    2021 RT Limited

    2016 RTS , Pearl White

  4. #4
    Active Member NM Wrench's Avatar
    Join Date
    Apr 2014
    Location
    Albuquerque, New Mexico
    Posts
    352
    Spyder Garage
    1

    Default Someone Has

    Quote Originally Posted by jcaburto View Post
    Has anyone installed a USB port on the passenger side? Maybe on the inner part of the speakers?
    I have the one above the glove compartment but wouldn’t it make sense to have one for the passenger too?
    I have a member of our club that installed one for his wife. If you look on the left passenger grip up near the top you will find a circular plug. (That is left as you are sitting on the bike). This is a perfect place as you don't need to cut any holes to install it.
    14 RT-S , Stock Large brake pedal White Pearl

  5. #5
    Active Member LJspydee's Avatar
    Join Date
    Nov 2012
    Location
    Casa GrandeAZ/formally WaterlooIA
    Posts
    175
    Spyder Garage
    0

    Default Passenger ISB Port

    We have a 2015 RTS model without BRP communication. I replaced the RH passenger volume controls with a dual USB port for my wife's phone and I pod. I wired it to a previously installed aux fuse panel. Works great!IMG_20170327_110753176.jpg
    2013 Silverado 2500HD Duramax
    2017 Honda Pilot
    2018 Maverick Trail 1000 DPS
    2015 RTS SE6 Intense Red Pearl
    2014 35' Keystone Fuzion Impact Toyhauler
    Ultimate Seats passenger backrest, Adjustable wind deflectors, Minitrailer USA trailer, Can Am driver backrest, Corbin passenger armrests, after market hitch, DIY bump skid, LED turn indicaters, cup holders, frunk decal stripes, DIY GPS mount, DIY Gopro dash mount, aux 12v & USB outlets, DIY belt rock shield, BajaRon swaybar, frunk 12v outlet

  6. #6
    Active Member jcaburto's Avatar
    Join Date
    Jan 2017
    Location
    Whittier, Ca
    Posts
    142
    Spyder Garage
    1

    Default

    Quote Originally Posted by NM Wrench View Post
    I have a member of our club that installed one for his wife. If you look on the left passenger grip up near the top you will find a circular plug. (That is left as you are sitting on the bike). This is a perfect place as you don't need to cut any holes to install it.
    Yes, I guess I never paid attention to that plug there. Perfect placement. Thanks!
    Julio Aburto



    Black Currant 2013 Can-Am Spyder RT Limited

    2013 RTL , Black Currant

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •