-
Very Active Member
Thunder QQ Baffle
Anyone have one of these that can send me some measurements? In particular, the OD of the sleeve portion and its length plus the overall length of the entire baffle?
Been calling Lamonster but no answer or call back from Jakob....
'15 F3-S Pure Magnesium Metallic - Mad Max Edition
'15 Mclaren 650S Coupe - Aurora Blue
"You Were Really Flyin', When I Passed You Back There!"
Chuck
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
-
Very Active Member
Big T Baffle
Originally Posted by hypurone
Anyone have one of these that can send me some measurements? In particular, the OD of the sleeve portion and its length plus the overall length of the entire baffle?
Been calling Lamonster but no answer or call back from Jakob....
The OD is the same as the ID of the muffler pipes..... I made mine and the tapered part was about 2.5 inches long , this is where I drilled the holes .....works fine ..... Mike
-
Very Active Member
'15 F3-S Pure Magnesium Metallic - Mad Max Edition
'15 Mclaren 650S Coupe - Aurora Blue
"You Were Really Flyin', When I Passed You Back There!"
Chuck
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
-
Very Active Member
Finally!
Got the info needed. Whew.....
'15 F3-S Pure Magnesium Metallic - Mad Max Edition
'15 Mclaren 650S Coupe - Aurora Blue
"You Were Really Flyin', When I Passed You Back There!"
Chuck
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
-
Active Member
I have a 2017 F-3 from Pitbull Powersports with their 1330 Primary Muffler Replacement Pipe.
I also have the Thunder QQ baffle from Lamonster garage.
The OD of the baffle is way smaller then the ID of this pipe.
T.P.
-
Active Member
You can call Big City Thunder and get a sleeve if you are concerend about the gap. I have installed the baffle both ways and the only difference was the time and work it took to fit the sleeve.
-
Very Active Member
Originally Posted by fencepost
You can call Big City Thunder and get a sleeve if you are concerend about the gap. I have installed the baffle both ways and the only difference was the time and work it took to fit the sleeve.
as stated in post #4, I got the info needed.
I'm done with my project!
'15 F3-S Pure Magnesium Metallic - Mad Max Edition
'15 Mclaren 650S Coupe - Aurora Blue
"You Were Really Flyin', When I Passed You Back There!"
Chuck
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|