-
Very Active Member
Brakes
I have a 2010 RTSM5 that need both front and rear brakes, it also needs a brake actuator. I would like to do the job myself. Any recommendations on where to buy the parts? The dealer wants $302 to do the job.
Thanks
Jeff
2010 RTSM5
-
Go to the homepage and click on BajaRon, he sells EBC brake pads, etc. You may need to get the actuator from someplace like cheapcycleparts.com
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
I have the BajaRon EBC discs and pads and they are WAY better than OEM. Plus, you would be helping one of our best supporting vendors.
"A Wise Man Once Said, I Should Ask My Wife."
2017 Champagne Metallic RT-S SE-6 Rivco Dual Flag Holders; Slingmods Highway Pegs; (Hate Them) Airhawk Seat Cushion; Show Chrome Black Touring Rack w/ Risers & Touring Windshield; RAM X Mount For TXTAG; TackForm Phone Mount; Lidlox; Magic Mirror Mounts; Guardian Bells; WOLO "Bad Boy" Air Horn; Dual USB Power Outlet With Voltmeter; 12V outlet for misc. stuff; Spyderpops Full View Mirror Turn Signals; Large Brake Pedal; Kott Grilles; Large Mud Flap; BajaRon 3 Piece Sway Bar, Last But Not Least, Kuhmo Rear Rire, Vedrestien Fronts.
2017 RT-S , Brake pedal extender is twice the size of the stock pedal. Champagne Metallic
-
-
Active Member
Brakes
Originally Posted by SpyderAnn01
Go to the homepage and click on BajaRon, he sells EBC brake pads, etc. You may need to get the actuator from someplace like cheapcycleparts.com
About how many miles can I get out of the factory brakes before pads have to be replaced, I have about 24,000 on them now?
Greetings from Idaho
2014 RT-S,
Barjaron swaybar, chome luggage rack, Ram Mount GPS, 12 volt dash outlet, spyderflap mudflap, Rivco flag mounts, drink2go and custom handlebar drink holders,Driver Backrest,Tri-Axis Handlebars, TRICLed turn signal lights. Custon Dynamic Magic Strobe Brake Modulator, Triple Dash Pouches, "Squared Away" Laser Alignment, Spyderpops Bumpskid, TricLed "Knightrider" LED
2014 RT , White (Mine) Cognac (wifes)
-
Active Member
Originally Posted by Zip
....The dealer wants $302 to do the job.
$302 doesn't sound too bad for all that you've indicated. (parts & labour ??)
Marilyn 2023 RTL Red
John 2023 RTL Black
previous:
2015 RTS SE6 Red
2015 F3S SE6 Silver
2011 RT SM5 Silver
2013 STS SM5 Silver
"common sense will prevail....but we see no sign of that"
-
Very Active Member
Originally Posted by SpyderAnn01
Go to the homepage and click on BajaRon, he sells EBC brake pads, etc. You may need to get the actuator from someplace like cheapcycleparts.com
EBC announced that their brake pads now come with the little clips that BRP uses to hold their pads on. BRP does not sell these separate so if you lose or break on u are SOL . Ask Ron to make sure the pas you get have the clips.
I only got 20,000 out of my rear brake but the fronts were good to 28,000.
Set up an account with Cheapcycleparts and you will get a cheaper price quote.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
2015 spyder rts
how do i get the rear break caliper piston to retract I have every thing released but canot get to go back in?
-
Very Active Member
REAR BRAKE CALIPER
You have to insert something like needle nose pliers in the two holes in the caliper. Turn clockwise while pushing hard. Do not use a clamp to push in . It has to be screwed in. Other people have had this problem including me. I never could get the piston to screw in and had to take it to the dealer. Hopefully you will have better luck.
2020 F3 Ltd
Spyderpops Bumpskid
Spyderpops Brake/Run/Turn Signal LED's
Lamonster Garage LED Fog Lights and Headlights
2013 ST-S retired 1/9/16 at 25,061 miles
2015 F3S sold at 77,565 miles.
-
His bike is a 2010: no Brembos on it...
Just take a honkin' Big screwdriver, and insert it between the pads. You'll have more than enough leverage to pry them apart!
Last edited by Bob Denman; 03-07-2018 at 06:14 PM.
-
Very Active Member
the pads on your Spyder should just push in. You may need a tool to push them in. I use a big "C" clamp.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
Depends...
Originally Posted by cyclekid58
About how many miles can I get out of the factory brakes before pads have to be replaced, I have about 24,000 on them now?
Will vary with model transmission and ryding style. I got 33,000 on the rear and have over 40,000 on the fronts. mine is an RS manual..
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Active Member
Brakes
Originally Posted by Chupaca
Will vary with model transmission and ryding style. I got 33,000 on the rear and have over 40,000 on the fronts. mine is an RS manual..
Mine is a 2014 RT-S SE6, I don't ride agressively but willl have them checked this spring when serviced.
Greetings from Idaho
2014 RT-S,
Barjaron swaybar, chome luggage rack, Ram Mount GPS, 12 volt dash outlet, spyderflap mudflap, Rivco flag mounts, drink2go and custom handlebar drink holders,Driver Backrest,Tri-Axis Handlebars, TRICLed turn signal lights. Custon Dynamic Magic Strobe Brake Modulator, Triple Dash Pouches, "Squared Away" Laser Alignment, Spyderpops Bumpskid, TricLed "Knightrider" LED
2014 RT , White (Mine) Cognac (wifes)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|