Results 1 to 10 of 10

Thread: Trailer harness

  1. #1
    Very Active Member Larry rt's Avatar
    Join Date
    Jul 2013
    Location
    Vestaburg Michigan
    Posts
    794
    Spyder Garage
    0

    Question Trailer harness

    There was a sponsor that sales wire harness for trailer, RT . Can’t find him now? Can someone tell me which sponsor sold this?

  2. #2
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Here is the link

    http://bigbikeparts.com/link.aspx?Pr...1&GroupGuid=16

    Or call Spyderpops at 501 760-1234


    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  3. #3
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    5,329
    Spyder Garage
    1

    Default

    Pierre at Can Am Spyder Accessories makes a good plug and play harness. I use his harness,tho I did modify it to five wire as my trailer is a five wire.

    http://www.canamspyderaccessories.com/

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA 25 years Life Member
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    TOI

    2012 Spyder RT L , Baja Ron Plugs and wires Lava Bronze

  4. #4
    Very Active Member Buckeye Bleau's Avatar
    Join Date
    Aug 2015
    Location
    Canton, Ohio
    Posts
    1,143
    Spyder Garage
    0

    Default

    I used Pierre at www.canamspyderaccessories.com for mine.

    With his plug and play harness and the awesome step by step video, it worked out perfectly for me.

    Joe
    U.S. Army Viet Nam Era Vet
    2013 Spyder RT-L, Black Currant
    Trunk mount dual SS flag holder
    TricLed foam hand grips (awesome)
    Chromed Soaring Eagle License Holder
    Utopia Deluxe driver backrest
    LED fender lighting
    Fast Flash LED brake light
    Spyder Pops LED/skid plate

  5. #5
    Very Active Member Mazo EMS2's Avatar
    Join Date
    Jan 2015
    Location
    southern WI
    Posts
    2,050
    Spyder Garage
    1

    Default

    Quote Originally Posted by Buckeye Bleau View Post
    I used Pierre at www.canamspyderaccessories.com for mine.

    With his plug and play harness and the awesome step by step video, it worked out perfectly for me.

    Joe
    Ditto..
    2021 RT Limited

    2016 RTS , Pearl White

  6. #6
    Active Member
    Join Date
    Jun 2015
    Location
    Hampton Roads, VA
    Posts
    436
    Spyder Garage
    0

    Default

    Quote Originally Posted by Buckeye Bleau View Post
    I used Pierre at www.canamspyderaccessories.com for mine.

    With his plug and play harness and the awesome step by step video, it worked out perfectly for me.

    Joe

  7. #7
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,263
    Spyder Garage
    0

    Default

    The problem with Can Am Spyder accessories trailer harness is the module he is using. It is unpowered and does not isolate the trailer from the Spyder. So depending on the trailer and the lights it has. You may get hyper flash of the signal or hazard lights when the trailer is connected. This has been report on a couple of threads. If you get a short circuit in one of the trailer circuits. The lights on the same circuit on the Spyder will fail with an orange screen and failures messages. For a couple dollars more he could have used the correct isolation converter and these potential problems will be avoided. No hyper flash. Any shorts in the trailer and the the trailer lights will fail. But the Spyder lights will not be affected.

    2018 F3 LIMITED

  8. #8
    Active Member
    Join Date
    Jun 2015
    Location
    Hampton Roads, VA
    Posts
    436
    Spyder Garage
    0

    Default Good point

    Quote Originally Posted by billybovine View Post
    The problem with Can Am Spyder accessories trailer harness is the module he is using. It is unpowered and does not isolate the trailer from the Spyder. So depending on the trailer and the lights it has. You may get hyper flash of the signal or hazard lights when the trailer is connected. This has been report on a couple of threads. If you get a short circuit in one of the trailer circuits. The lights on the same circuit on the Spyder will fail with an orange screen and failures messages. For a couple dollars more he could have used the correct isolation converter and these potential problems will be avoided. No hyper flash. Any shorts in the trailer and the the trailer lights will fail. But the Spyder lights will not be affected.
    I went back and found I ordered from SHOWCHROME (off EBAY). Came with a relay board, and a heavy wire to run up to battery. I can hear the relays clicking when signals are on. I have read MANY forums where using the existing wiring caused failures of the module (due to grounding I think over time).

  9. #9
    Active Member Texas Al's Avatar
    Join Date
    Jun 2017
    Location
    Azle TX
    Posts
    277
    Spyder Garage
    1

    Default 2017 F3 s trailer harness

    does anyone make a plug and play for a 2017 F3 s ?
    2021 900 Ace , Black & Gold

  10. #10
    Active Member sylvester's Avatar
    Join Date
    Aug 2017
    Location
    arkansas
    Posts
    141
    Spyder Garage
    0

    Default harness

    Quote Originally Posted by Texas Al View Post
    does anyone make a plug and play for a 2017 F3 s ?
    I used electrical connection out of Tennessee for my 17 F-3T Limited

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •