|
-
Active Member
 Limp Mode - Coincidence?
So...I brought my 2017 F3T to have it laser aligned and I added led lights on the front cross bars.
The work was performed by a spyderlovers vendor with a lot of experience. 3 hours later I pay and ryde away.
About 1 mile into the ryde the limp home mode comes on. I went back and he had no idea why.
I'm not blaming him but now I guess it has to be towed to the dealer.
Any ideas out there?
Last edited by Jeffmal; 01-28-2018 at 03:40 PM.
-
Very Active Member
-
Active Member
 Originally Posted by akspyderman
Keep us informed. I cannot help with a good answer here. 
Here are the codes I got
C006C C0063 P0000
Anyone know what these codes are?
-
SpyderLovers Sponsor
Originally Posted by Jeffmal
Here are the codes I got
C006C C0063 P0000
Anyone know what these codes are?
lamont should know these. plus I think somewhere on here are the codes
Tall flag mount, spyderpops skid plate & stainless steel screen mesh, airhawk adjustable cushion, raised white lettered tires.
-
Very Active Member
limp mode
Originally Posted by Jeffmal
Here are the codes I got
C006C C0063 P0000
Anyone know what these codes are?
Have you tried shutting it off, remove the key, walk once around the bike and then restart and ride it. Sometimes things just happen, then as mysteriously as they happen they go away, never to be seen again. Give it a try before you have it towed; what can you loose???
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Active Member
[QUOTE=IGETAROUND;1332199]Have you tried shutting it off, remove the key, walk once around the bike and then restart and ride it. Sometimes things just happen, then as mysteriously as they happen they go away, never to be seen again. Give it a try before you have it towed; what can you loose???
Uh...Yeah, didn't work!
Thanks
-
It is a yaw rate sensor error. Did they reset you on BUDS after the alignment?
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
this issue
Everything that happens in the system is logged into the computer and doesn't disappear .... If your Dealer can't find it ..... BRP will help them figure it out ....... BUT they have to ask for the assistance ..... Trust me , it's logged in B.U.D.S. .....Mike
-
Very Active Member
Originally Posted by SpyderAnn01
It is a yaw rate sensor error. Did they reset you on BUDS after the alignment?
BINGO
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Originally Posted by Jeffmal
Here are the codes I got
C006C C0063 P0000
Anyone know what these codes are?
Google 'spyder codes' then follow the Lamonster Garage link and it will give you a complete list of codes and their meanings.
You can also download the spydercode app to your phone for more info.
-
Active Member
Originally Posted by Jeffmal
So...I brought my 2017 F3T to have it laser aligned and I added led lights on the front cross bars.
The work was performed by a spyderlovers vendor with a lot of experience. 3 hours later I pay and ryde away.
About 1 mile into the ryde the limp home mode comes on. I went back and he had no idea why.
I'm not blaming him but now I guess it has to be towed to the dealer.
Any ideas out there?
See post # ll . I should have placed it here. Good luck
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
