Results 1 to 25 of 134

Threaded View

  1. #11
    Active Member
    Join Date
    Jun 2017
    Location
    "Granite State"
    Posts
    116
    Spyder Garage
    0

    Default

    Quote Originally Posted by Wildrice View Post
    If the front wheel rotor has the same diameter as the rear---cutting & inputting all 3 speed sensors to the ECM would produce the same effect as riding in a straight line. Digital frequency is nothing more than pulses & all 3 wheels use them. Unless the ratio from the front is different than that from the rear---how else could it produce a problem?? Just my opinion from spending 20 yrs as an I/O & Mainframe National/International Tech Support Specialist. I just about lived on an airplane for 7 yrs repairing systems in 40+ States & England, France, Germany, & Mexico City. Technology units have really shrank in size but most of the concepts are fairly similar on the output side. I don't miss riding the NYC subway at 2AM-3AM with the weirdo's. When time, weather, & family health issues clear up I will locate the speed sensor wires entering the ECU--cut & splice & go for a ride & let you know the results of my theory. Currently it is 25 degrees in Westerville OH Worse case if the front wheel sensors attach to more than the ECU I will remove the front wheel sensors & splice all 3 sensor wires together at the ECU in lieu of just letting the front wheel sensor wires as an open floating. The ECM maybe sending different signal.wires to the Trans & VSS.
    Darrell
    Had read on other forums that this was one way to disable anti-slip on older machines that did not have provisions to disable traction control.... (After the mod, traction control reporting 0 slip, all input reading off the front wheel.) But even without mod (me simply disabling t/c on my SE machine) there's not really enough power during warm weather (with sticky tires) to reliably get the tire loose/counter-steer. (So close, but not quite there. And I have no interest/won't hold the brake to build power from a stop, although that might work.)

    I hope someone comes up with a good flash for my machine that makes a difference. I'd be happy with 10 - 15% increase. That would make all the difference with traction control disabled. As it is now, 2/3 of the time I accelerate from a stop (even turning onto the road) with traction disabled in warm weather: Instead of the expected slip & counter-steer, all I'm left with is my inside front tire 6 inches off the ground. Definitely not the desired results!

    Happy Thanksgiving everyone!
    Last edited by TRLBLZR1; 11-24-2017 at 08:19 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •