-
Active Member
Brake failure
My break failure light is coming on does anybody know why this is happening it says low fluid But the fluid is good
-
Very Active Member
MMMM i guess
I see you have a double post , so I guess the 1st post was for the front reservoir , and this post is for the rear reservoir ! add a touch of type 4 brake fluid in both tanks , cover the floats ... ( refer too the thread time post 1.07 )
-
Very Active Member
Originally Posted by youngers
I see you have a double post , so I guess the 1st post was for the front reservoir , and this post is for the rear reservoir ! add a touch of type 4 brake fluid in both tanks , cover the floats ... ( refer too the thread time post 1.07 )
What he said. The fluid level will look fine, but add some anyways.
-
Active Member
Originally Posted by youngers
I see you have a double post , so I guess the 1st post was for the front reservoir , and this post is for the rear reservoir ! add a touch of type 4 brake fluid in both tanks , cover the floats ... ( refer too the thread time post 1.07 )
The double post post was by accident didn't think the first one posted
-
Very Active Member
BRAKE FLIUD
-
You may want to check your pads also. If they are worn you'll be using more fluid.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
SpyderLovers Founder
Duplicate post. Please post to other thread.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|