-
Active Member
Originally Posted by Cindy-TricLED
Yes PWM, you only need to clean your stock mirror with alcohol swab, let dry. peel the back sticker and stick it on!
The F3T model has a molded-housing that fits flush right over the OEM mirror, so it will look just like factory
Thanks got them ordered.
2017 F3- Limited
F4 23" Windshield, Ultimate Backrest, Spyder Cuff, SpyderPops Bump Guard, Sena SMH10 Intercom, BajaRon Sway Bar, Baker Cup Holder, RT-622 trailer w/Spyder Pops Bump Guard
-
Thank you!!
Originally Posted by pwm
Thanks got them ordered.
Thanks a bunch
-
Very Active Member
i,too, bought a set a couple of months back.lots wider view to the rear.
you have a big from me , also.. money well spent.
2015 rts-white pearl- mods- '16 F3 fat 6 chrome wheels,
and some little stuff. setback utopia backrest, baja ron
sway bar, oem adj. air deflectors, marlin gps compass,
lamonster fbb foot pegs[modified brackets], lamonts
vibration damper, rock guard, and side case stiffener kit,
. brp comfort seat. , fomozas and
altimax, magic mirror mts, and wide mirrors.
[joyce & irvin toms]
-
Very Active Member
We just got a set of these for Louise F3T. VERY nicely done product. Thanks!
-
Very Active Member
My wife bought me a set for my birthday and I just installed them Wednesday. This morning, I ran an errand (about 35 miles through town) and had a chance to really see how they work. I really like them a lot. A great addition to my F3 Limited.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
if you have a friend that rides GOLD WING
Thanks for all the orders and rave reviews all... we really appreciate it!
Just FYI - if you have friends that ride a GOLDWING, please let them know that we also carry this Wide-Vu mirrors for GoldWings
-
Very Active Member
Originally Posted by Cindy-TricLED
Thanks for all the orders and rave reviews all... we really appreciate it!
Just FYI - if you have friends that ride a GOLDWING, please let them know that we also carry this Wide-Vu mirrors for GoldWings
Cindy, I ordered mine yesterday and haven't got them yet. Is there a delivery problem?
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Active Member
My husband ordered mine for my birthday present. So, I've been asking him every day if they were here. He kept saying no, till tonight when I said how much I really needed them to ryde safely...
Yep, he actually thought he'd keep them till my birthday next month.
Will install them tomorrow, along with my lovely new saddlebags.
2017 F3-S
2010 Honda Element
Harley map
Spyder map
-
Very Active Member
If you don't have the WideVue mirrors...
...from TricLED, get them!
Jim
Ryde, eat, sleep.... repeat
2019 Spyder RT Limited Pearl White/Dark
LaMonster drink holder with X-Grip
LaMonster Belt Dampener
Lamonster USB cable with extension
Variously called Stormtrooper, Pearl, and Goober by wife and various (friends?)
-
It's flying!
Originally Posted by Peteoz
Cindy, I ordered mine yesterday and haven't got them yet. Is there a delivery problem?
Pete
Hi Pete, I bet it's somewhere in a belly of a plane across the pacific
Thanks Pete!!!
-
Not one picture of what we are talking about.............
Dean O
Gran Pa Hoon
Founder San Jose BMW
Builder of the Motorcyclist Cafe Barn and Bunkhouse
Alamogordo, NM
'20 Spyder F3 L
-
visit our website
Originally Posted by old Timer
Not one picture of what we are talking about.............
Old Timer, you can visit our website www.tricled.com to see the description and pictures.
From "Product " drop down, select New Product
Which model do you have? RT ?
https://www.tricledusa.com/_p/prd1/4...clusive-mirror
-
Active Member
Durability?
How susceptible are these to scratching when cleaning? Are they just plastic with a thin mirror film coating that could be easily scratched, or are they made from a durable material that could take some abuse and still remain unscathed? Thanks!
-
Originally Posted by Boilermaker
How susceptible are these to scratching when cleaning? Are they just plastic with a thin mirror film coating that could be easily scratched, or are they made from a durable material that could take some abuse and still remain unscathed? Thanks!
Hi, they are not plastic thin mirror coating.
We rode ours since we put them on in March and no scratch
Gently cleaning it by removing the debris and dust with scratch free cloth , then use regular automotive glass/window cleaner.
All TricLED brand product carries lifetime warranty of manufacturing defect for as long as you own your Spyder.
I hope this information helps.
-
Active Member
Originally Posted by Cindy-TricLED
Thanks a bunch
Well I received mine yesterday. Went to install this morning before my ride and found out that they will not fit the F3-T Limited. My mirrors a a bit larger than these add ons.
2017 F3- Limited
F4 23" Windshield, Ultimate Backrest, Spyder Cuff, SpyderPops Bump Guard, Sena SMH10 Intercom, BajaRon Sway Bar, Baker Cup Holder, RT-622 trailer w/Spyder Pops Bump Guard
-
I just installed two sets of these mirrors today; one set on a 2014 RT and one set on a 2016 F3 Limited. Installation only took a few minutes per set and the fit on both bikes is excellent. I took a test ride to see how the mirrors worked at speed and there was no noticeable vibration. The mirrors provide a greatly expanded field of vue to the rear and sides of the bike. Overall, I am very pleased with our purchase. Well done, Tricled!
-
Active Member
Installed mine today. Easy installation and they fit my F3-S perfectly.
2017 F3-S
2010 Honda Element
Harley map
Spyder map
-
Very Active Member
Originally Posted by pwm
Well I received mine yesterday. Went to install this morning before my ride and found out that they will not fit the F3-T Limited. My mirrors a a bit larger than these add ons.
Thats odd, pwm, There's a photo of the F3T / F3L over mirrors on the TricLed site, and they fit perfectly. Sounds like you might not have the correct model over mirrors.
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Originally Posted by Peteoz
Thats odd, pwm, There's a photo of the F3T / F3L over mirrors on the TricLed site, and they fit perfectly. Sounds like you might not have the correct model over mirrors.
Pete
We already settled this.. my mistake that I shipped him the F3 model
-
Very Active Member
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
GS/RS
Does anyone have a SIDE (edge) view of these on a GS/RS? I want to see how thick they are and how much they stick out compared to stock. Thanks
When life throws you curves, aim for the apex
Current stable: 09 Thruxton / 09 FZ6
Sold List: 97 Ninja500R, 03 SV650K3, 01 Ducati 750Sport Dark, 73 CB350/4, 03 F650GSA, 08 Gixxer600, 03 Gixxer600, 91 VFR750F, 09 KLX250, 06 Thruxton 900, 08 Spyder RS , 12 Street TripleR, 15 RC390, 02 VFR800, 09 KLX250S, 10 F650GS
JLohPhotos
... Motorcycles are kind of like Baskin Robbins... You're looking at 31 flavors of ice cream, don't you kind of want to know what they all taste like?...
-
Originally Posted by asp125
Does anyone have a SIDE (edge) view of these on a GS/RS? I want to see how thick they are and how much they stick out compared to stock. Thanks
ASP , the wide-vu mirror has a thin mold casing, so it will cover the side edge of you OEM mirror.
-
Very Active Member
-
GOS member (Girls On Spyders)
Mirrors
Originally Posted by murphybrown
I ordered mine. That should be here today or tomorrow!
-
Any handy tips to make sure they line up perfectly the first time??
I don't want to have to peel them off if I miss.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|