-
Very Active Member
2015 rtl rear axle
Does anyone happen to know the torque specs for the rear brake rotor and rear axle nut?
By the way, the cheap Harbor Freight disk brake set has a plate to fit the 2 holes in the rear caliper and the tool turned it back in with hardly any effort. Well worth the money spent.
https://www.harborfreight.com/disc-b...-pc-63264.html
I searched, came up with a few hundred threads for every word and couldn't find what I was looking for.
Thanks
-
Very Active Member
I found this for the front, but nothing for the back yet.
Front caliper bolts are 35 lbf*ft 48 N*m
Front Wheel lugs are 77lbf*ft 105 N*m
-
Very Active Member
Found this
rear brake rotor bolts 68 lbf FT
rear caliper bolts 77 lbf ft
rear axle nut 166 lbf ft
However it is showing the 2 piece rear wheel and hub like on the older RT and this is a 2015 manual. Mine has the incorporated hub like a 2016. Does nayone know if the torque specs are the same?
Thanks
-
Very Active Member
Originally Posted by Fatcycledaddy
Found this
rear brake rotor bolts 68 lbf FT
rear caliper bolts 77 lbf ft
rear axle nut 166 lbf ft
However it is showing the 2 piece rear wheel and hub like on the older RT and this is a 2015 manual. Mine has the incorporated hub like a 2016. Does nayone know if the torque specs are the same?
Thanks
They are the same.
2021 Sea To Sky, 2020 RTL
Isn't it weird that in AMERICA our flag and our culture offend so many people......
but our benefits don't?
-
Very Active Member
Originally Posted by PW2013STL
They are the same.
AWESOME. Thank you very much for the help!!
-
The rear axle nut is really 177 ftlbs? How do you tighten the nut with the cotter pin? I have a 2013 RTL.
-
Very Active Member
Originally Posted by rwyma
The rear axle nut is really 177 ftlbs? How do you tighten the nut with the cotter pin? I have a 2013 RTL.
It's 166 ft lbs. My axle doesn't have a cotter pin, but the hitch bolt that goes through the rear axle does.
2021 Sea To Sky, 2020 RTL
Isn't it weird that in AMERICA our flag and our culture offend so many people......
but our benefits don't?
-
Very Active Member
Originally Posted by rwyma
The rear axle nut is really 177 ftlbs? How do you tighten the nut with the cotter pin? I have a 2013 RTL.
You remove the cotter pin, tighten and then replace with a new cotter pin. The cotter pin is only to hold the nut onto the axle in case it backs completely off.
2020 RTL SE6
Previously 2008 GS SM5 and 2014 RT SE6
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|