|
-
Active Member
 Tricled
Anyone installed the horn from Tricled on your F3.
trying to install mine and there is no way to get it to fit.....
2015 F3S SE6
You don't stop riding because you get old, you get old because you stop riding
-
Very Active Member
I know reggie will help you at tricled
4" Stubby antenna, Dual arm LEDs Fender LEDs, Back Rest, Luggage Rack, Run, Brake and Strobe for top case, Mirror LEDs,Back Off decal on mud flap, reciptal for Battery Tender and Heated Gear, mirror LEDs that stay on or work with blinkers, GPS, side bag red LEDs, Top cuff with Ram Ball phone holder And USB power, Top cuff with drink holder and passenger cup holder. Also grilles in front of radiators, also spyclops. Garmin 595 GPS, Freedom windshield. Also glove box console And trunk wrap in carbon fiber from wrap my spyder. BRP comfort seat. added garage opener with rocker switch in center console to match other switches. And I have added Elka stage 2 shocks.
-
send us an email
 Originally Posted by Sccar
Anyone installed the horn from Tricled on your F3.
trying to install mine and there is no way to get it to fit.....
Hello, can you send us an email to sales@tricled.com
Reggy or our tech will be able to help you.
Also please include your phone number in your email.
- Cindy
-
Very Active Member
-
Very Active Member
I have been dealing with Reggy since 2008. TricLED is a class operation.
 Very Happy Spyder Guy
The 2015 F3 has over 46,000 miles
Have Spyder...Will Travel
-
-
Had very bad exp with this company.
I am treated with racism. 
-
Very Active Member
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
Originally Posted by GDA
Had very bad exp with this company.
I am treated with racism.
"Racism?!?" That's a bold accusation to make. I find that hard to believe.
 Chris
2016 F3-T SE6
-
-
Check your Inbox
Originally Posted by GDA
Had very bad exp with this company.
I am treated with racism.
Hi GDA, about 2 hours ago, I sent you a private message in SL right after i saw you comment.
I don't know who you are just by looking at your avatar name. But I honestly don't believe myself or anyone in my company would have treated someone or a customer with such manner. Seeing your location in Canada, we don't handle a very large customer based from Canada as we have a exclusive distributor there, so I really would like to know the issue.
If you would like to take moment to reply to my PM in your inbox with your full name (or the name you used to place an order with us), I would gladly respond to you personally instead of exchanging thread in SL.
Thank you and I appreciate your time and consideration in advance.
Sincerely,
Cindy / TricLED
-
Active Member
TricLED is a class act company! Take Cindy up on her offer to respond.
www.sasspyders.com
2016 F3T
2015 Freedom Trailer
Sypderpops BumpSkid Plate
Lamonster ISP Key Cover
Lamonster F3 Bar Clamp and Power Port
Lamonster RIP floorboards and frame caps
Lamonster Chevron Highway Pegs
BajaRon Swaybar & Heim Links
F4 Custom 21" tinted windshield
BRP Cannonball Seat
BRP F3 Idler Pully
FOBO TPMS
LidLox (dual)
Garmin 660LM GPS
Cat Delete Performance Pipe
F3T Top Case
PPA Black Widow Wheels
Custom Frunk Wrap
-
Active Member
What!?
Must be GDA is thinking of a different company. Never experience any such from Reg or Cindy. They are the best!
-
Originally Posted by GDA
Had very bad exp with this company.
I am treated with racism.
Accusing someone of racism is so 2016. This is 2017.....we are all zenophobes now.
-
Active Member
Exceptional customer service from Tricled!
-
Let me venture a guess:
He doesn't speak or understand English good.....and therefore had trouble communicating.
And then called that "racism".......which of course isn't even close.
FYI.....seeing this thread reminded me I need a couple of things. Placed my order with them today.
-
Rarely have I dealt with anyone as competent and helpful as Cindy was on the phone with me. Went out of her way to fix an order that was from another dealer. I was thoroughly impressed.
-
Originally Posted by Easy Rider
Let me venture a guess:
He doesn't speak or understand English good.....and therefore had trouble communicating.
And then called that "racism".......which of course isn't even close.
FYI.....seeing this thread reminded me I need a couple of things. Placed my order with them today.
Another sad possibility  :
Troll Bobbleheads.jpg
-
Thank you!!
Originally Posted by donrokon
Rarely have I dealt with anyone as competent and helpful as Cindy was on the phone with me. Went out of her way to fix an order that was from another dealer. I was thoroughly impressed.
Don - thank you!
I was glad to help you that day.
by the way - was the installation for the RT Vader Headlight & Foglight easier (or easier) with our new quick-connect and connectors?
-
-
I just went through this installation on my wife's F3T with Nestor, with TricLED. He was more than helpful.
A couple of points I brought up to him:
1. You need to remove the L bracket in front of the horn, this allows you to fit the horn. and yes, re-install the L bracket
after you get the horn in place.
2. You need to remove the black spacer on the bolt. If not, the horn hits the steering rod and is damn close to the water hoses.
Removal of the black spacer allows enough room for both.
I told him he needs to add these to the instructions, as they are written, they're lacking in clarity....
Works fine now.
-
Active Member
Originally Posted by TexasMule
I just went through this installation on my wife's F3T with Nestor, with TricLED. He was more than helpful.
A couple of points I brought up to him:
1. You need to remove the L bracket in front of the horn, this allows you to fit the horn. and yes, re-install the L bracket
after you get the horn in place.
2. You need to remove the black spacer on the bolt. If not, the horn hits the steering rod and is damn close to the water hoses.
Removal of the black spacer allows enough room for both.
I told him he needs to add these to the instructions, as they are written, they're lacking in clarity....
Works fine now.
great info to know. I could have used that..... had to relocate it because I was hitting the steering rod and could not get the horn to line up with the bracket.
2015 F3S SE6
You don't stop riding because you get old, you get old because you stop riding
-
I bought from lamonster ,bajaRon and spyderpops with no problems.
Tricled just do not want to do any business with me
They think i am not a spyder rider and try to copy their product.
I ever send them a photo that i ride on my spyder.
Anyway, as a customer i dont want to pay them my money and beg for their mercy for sell their product .
-
Very Active Member
I have been dealing with Tric-led since 2014. Great people to deal with, awesome customer service, fast shipping. Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
Originally Posted by GDA
I bought from lamonster ,bajaRon and spyderpops with no problems.
Tricled just do not want to do any business with me
They think i am not a spyder rider and try to copy their product.
I ever send them a photo that i ride on my spyder.
Anyway, as a customer i dont want to pay them my money and beg for their mercy for sell their product .
GDA, it might just be the way I am reading your post, but how exactly does that substantiate your earlier, serious claim that they are "racist" ?
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
...But only since 2010... 
