Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Aug 2022
    Location
    Spokane, WA
    Posts
    13
    Spyder Garage
    0

    Default Any thoughts on where to get a Spyder Full body wrap to change the color?

    I have a 2011 Spyder RT. Has anyone done a full body wrap on their Spyder to change the color. Mine is the metallic grey, I would like to change it to a Pearl white type of color.
    With all the different angles it looks like wrapping this would be quite the project.
    Any thoughts on where to get this done, or if there are kits available for this. Good or bad experiences would be nice to hear.

  2. #2
    Very Active Member JKMSPYDER's Avatar
    Join Date
    Dec 2012
    Location
    Murphy, NC
    Posts
    1,389
    Spyder Garage
    1

    Default

    Wrap My Spyder is a sponsor on the home page. They are located upper left on the home page. Contact them and they might be able to help.
    2020 F3 Ltd

    Spyderpops Bumpskid
    Spyderpops Brake/Run/Turn Signal LED's
    Lamonster Garage LED Fog Lights and Headlights
    2013 ST-S retired 1/9/16 at 25,061 miles
    2015 F3S sold at 77,565 miles.
    2015 F3-S , BajaRon Plugs Can-Am Red

  3. #3
    Active Member
    Join Date
    Dec 2020
    Location
    Down South
    Posts
    426
    Spyder Garage
    0

    Default

    I believe I saw a youtube video or two with some partial wraps. 1 of the site vendors wrapmyspyder might be a good place to start your search. I know they offer pre-cut vinyl for partial wraps. They may offer full kits as well.
    Last edited by JohnRuckus; 03-30-2023 at 03:36 PM.
    '20 RT Chalk Metallic

  4. #4
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier LoUiSiAna
    Posts
    5,977
    Spyder Garage
    1

    Default

    Patience good luck. There are professionals that maybe available & worth considering. Largest decal I attempted was across the frunk & with skilled help was still quite frustrating. Small squeegee can help with skilled hands

    https://www.amazon.com/TECKWRAP-Plas...05102941&psc=1

    As per the decals, learn how to start in middle/center & work out. Particularly difficult if you want edges to line up & crazy curves are somewhere in between. Can be done, just be patient. Whoever you get the wrap from should provide proper cleaning/prep instructions.
    Last edited by Peter Aawen; 03-30-2023 at 05:45 PM. Reason: ' 's ;-)

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ,
    brake light strips, wide vue mirrors
    Rivico SOMA modulation brake leds
    sawblade mowhalk fender accents
    minispyder dash toy
    Lid lox
    KradelLock
    Pakitrack
    GENSSI ELITE LED H4 headlights
    FLO (Frunk Lid Organizer)
    BRP fog lights, trailer hitch
    SENA 20S EVO
    2013 STL , Stock Stock Black currant

  5. #5
    Very Active Member FrogmanDave's Avatar
    Join Date
    Oct 2021
    Location
    Wichita, KS
    Posts
    958
    Spyder Garage
    0

    Default

    Full wrap will require heat. It is a very difficult job. This work is best accomplished by someone with experience.
    2022 Petrol Metallic RT Limited / 'PYDER'
    There's no place like G28 X0 Y0 Z0

  6. #6
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,272
    Spyder Garage
    0

    Default

    Quote Originally Posted by FrogmanDave View Post
    Full wrap will require heat. It is a very difficult job. This work is best accomplished by someone with experience.
    .... I have seen FULL wraps for Cars on e-bay ..... the demo video's of their cars look great , but I doubt it was done by an amateur ..... Mike

  7. #7
    Member
    Join Date
    Aug 2022
    Location
    Spokane, WA
    Posts
    13
    Spyder Garage
    0

    Default

    Thanks for the advice, we will see where this goes

  8. #8
    Very Active Member
    Join Date
    Aug 2014
    Location
    Northern Kalifornia
    Posts
    3,398
    Spyder Garage
    0

    Default

    I had a small utility trailer I wanted wrapped to match the color of my spyder. The bid I got was more than what the trailer cost me. Not sure if they just didn't want to do it or if it was a legitimate estimate. Anyway, wraps ain't cheap. I got an estimate at an autobody shop for a paint job that was half the cost of the wrap. Good luck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •