Results 1 to 6 of 6
  1. #1
    Active Member
    Join Date
    Nov 2015
    Location
    Cypress
    Posts
    159
    Spyder Garage
    1

    Default Volt meter installation on the F3T

    Adding some farkels to the F3T this week and thought I would show the volt meter I installed in the dash. http://www.ebay.com/itm/351884215509...%3AMEBIDX%3AIT
    If you have any flat area on your particular bike, all you need is some space below it and the installation uses a 1 1/8" hole saw. Tape and then mark your center of hole and drill a pilot hole and then use the hole saw.
    I ran my switched power from the "customer power lead" on the left side of the bike.
    Buckskin

    IMG_0389.jpgIMG_0392.jpg
    2016 F3T , Pearl White

  2. #2
    Active Member SpyderF3's Avatar
    Join Date
    Nov 2016
    Location
    Hummelstown.Pa.
    Posts
    131
    Spyder Garage
    0

    Default

    Yep I added one as well with 2 USB ports and a cap when not in use
    Attached Images Attached Images

  3. #3
    Active Member
    Join Date
    Dec 2014
    Location
    NY
    Posts
    243
    Spyder Garage
    0

    Default

    [QUOTE=Buckskin;1262369]Adding some farkels to the F3T this week and thought I would show the volt meter I installed in the dash. http://www.ebay.com/itm/351884215509...%3AMEBIDX%3AIT
    If you have any flat area on your particular bike, all you need is some space below it and the installation uses a 1 1/8" hole saw. Tape and then mark your center of hole and drill a pilot hole and then use the hole saw.
    I ran my switched power from the "customer power lead" on the left side of the bike.
    Buckskin

    I like farkles that are actually useful!

  4. #4
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier LoUiSiAna
    Posts
    5,977
    Spyder Garage
    1

    Default

    Thx been looking for a clean small one like that for other projects I am working on too

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ,
    brake light strips, wide vue mirrors
    Rivico SOMA modulation brake leds
    sawblade mowhalk fender accents
    minispyder dash toy
    Lid lox
    KradelLock
    Pakitrack
    GENSSI ELITE LED H4 headlights
    FLO (Frunk Lid Organizer)
    BRP fog lights, trailer hitch
    SENA 20S EVO
    2013 STL , Stock Stock Black currant

  5. #5
    Very Active Member al0vely's Avatar
    Join Date
    Apr 2016
    Location
    Indiana
    Posts
    867
    Spyder Garage
    3

    Default

    Quote Originally Posted by SpyderF3 View Post
    Yep I added one as well with 2 USB ports and a cap when not in use
    I am looking to add the same type of adapter.

    How do you remove the speaker grill cover?
    Love my Spyders
    2016 F3L Steel Black purchased 7/16/2016 Sold 3/11/2023 (22,500 mi)

    2014 RTS Circuit Yellow purchased 3/2/2018

    2020 RTL Petrol Blue purchased 1/27/2023

    Girls on Spyders #3195

    No more 2 wheels
    2020 RTL , Lamonster floor board riser Petrol Blue

  6. #6
    Very Active Member Rattlebars's Avatar
    Join Date
    Mar 2017
    Location
    Girard OH (summer) Greenville SC (winter)
    Posts
    877
    Spyder Garage
    1

    Default

    Quote Originally Posted by al0vely View Post
    I am looking to add the same type of adapter.

    How do you remove the speaker grill cover?
    Just yank it and it will come right out. If I add one of these it will be directly to the battery with a relay for when you turn on the key. Sometimes hooking to accessory terminals will show variations.
    to see my 2016 F3-T and many how to's
    2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •