Results 1 to 8 of 8
  1. #1
    Active Member nealperkins's Avatar
    Join Date
    Feb 2017
    Location
    Fort Myers, FL
    Posts
    211
    Spyder Garage
    0

    Default Handlebar ram mount for 2016 F3-Limited

    I just viewed http://www.canamspyderaccessories.com (Pierre's) video on the gel pad tank covers, which look pretty good. But, on the right handlebar of his F3S, he has a collar holding a ram ball. I have a 2016 F3-Limited and would like to have such a thing. Would you know the source of that?

    Thanks!

  2. #2
    Active Member
    Join Date
    Jul 2014
    Location
    Nowhere
    Posts
    263
    Spyder Garage
    0
    "If you can't be a good example, then you'll just have to be a horrible warning." Catherine Aird

  3. #3
    Active Member nealperkins's Avatar
    Join Date
    Feb 2017
    Location
    Fort Myers, FL
    Posts
    211
    Spyder Garage
    0

    Default

    I don't think that's it. The one in the video shows a collar going around the handlebar.

  4. #4
    Very Active Member Highwayman2013's Avatar
    Join Date
    Nov 2012
    Location
    North Las Vegas, NV
    Posts
    4,561
    Spyder Garage
    1

    Default

    I see the one on the bolt on the handlebar clamp. I have that one and it works well.
    2016 F3 Limited
    2019 Ryker Rally
    2014 Suzuki V Strom 650
    2020 CSC TT 250
    2016 F 3 Limited , Vegas White

  5. #5
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,143
    Spyder Garage
    2

    Default

    Quote Originally Posted by nealperkins View Post
    I don't think that's it. The one in the video shows a collar going around the handlebar.
    That's an incorrect assumption Neal. What Spyder 42 is showing you is correct. It only looks funny because the Lamonster part is the top half of the collar that replaces stock. If Pierre's looks like the below, then the Lamonster part is what you want. I have both left and right sides on my F3-L.
    IMG_0526.jpg
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  6. #6
    Invalid Emails
    Join Date
    Aug 2010
    Location
    Guelph,Ontario,Canada
    Posts
    1,995
    Spyder Garage
    0

    Default

    Quote Originally Posted by nealperkins View Post
    I don't think that's it. The one in the video shows a collar going around the handlebar.
    You are looking for the ram mount model that Lamonster garage sells.

    gpscity.com sells them too.

    http://www.gpscity.com/ram-mount-tor...with-1-in-ball


  7. #7
    Active Member nealperkins's Avatar
    Join Date
    Feb 2017
    Location
    Fort Myers, FL
    Posts
    211
    Spyder Garage
    0

    Default

    Thanks, That looks better than the one I found.

  8. #8
    Active Member SpyderNeil's Avatar
    Join Date
    Jul 2015
    Location
    Kamloops B C
    Posts
    173
    Spyder Garage
    2

    Default

    Quote Originally Posted by Marker View Post
    You are looking for the ram mount model that Lamonster garage sells.

    gpscity.com sells them too.

    http://www.gpscity.com/ram-mount-tor...with-1-in-ball

    Amazon sells them as well
    2020 Harley Davidson Tri Glide Ultra
    2017 F3-T SE6 White / BRP Backrest / Nuvi 58 LM / Polaris Spring Spacers / CALSCI 22" Shield
    2016 RTE6 , Black

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •