We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.
We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.
Anybody have any suggestions?
I made some for mine. Used 3 1/2 dog bone risers for 7/8 handlebars. The RT handle bars can be mounted, but a adapter plate will have to be made. The 2013 models has no problem adding the RT handle bars.
David
We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.
Anybody have any suggestions?
Value Accessories, a sponsor here, has a set of pullback risers that will reduce the reach by up to 3 1/2 inches.
We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.
Anybody have any suggestions?
Look at Custom Dynamics I have a 2012 RS-SE5 and I put these on my spyder within the first week I had it they are adjustable to a point they rise up and back there is enough cable to install them my bars are black and the riser are black good luck. jtpollock
just found this Custom Dynamics® Spyder Easy Riser™
Last edited by jtpollock; 03-15-2017 at 10:53 AM.
Reason: added to my comment
Look at Custom Dynamics I have a 2012 RS-SE5 and I put these on my spyder within the first week I had it they are adjustable to a point they rise up and back there is enough cable to install them my bars are black and the riser are black good luck. jtpollock
just found this Custom Dynamics® Spyder Easy Riser™
They no longer sell the risers. They still have the instructions. Wanted a set for mine about a year ago and was told by them no longer available.
regards, David
They no longer sell the risers. They still have the instructions. Wanted a set for mine about a year ago and was told by them no longer available.
regards, David
Bummer I really like mine and they were not that hard to install. jtpollock
When I bought my '09 RS I put Helibar risers on. They raised the bar 5" and brought it back 3". There was just cable enough. I then put a tall windshield on and invented my first Seal Floorboards. I almost felt like I was sitting on a cruiser. You can see a photo on my website. Loved sitting taller and straightener. That's when I became aware of what it means to.......
Ride in comfort.
We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.
I recently added them to my 2010 RSS and they work well!
These are the most compleat kit at lowest price, they are $70 less than Rivco, I like em.
I also like your idea of not cutting the old bar off and using it to mount more junk.
2010 GS SE5 red and black
1982 Honda GL650 (showroom condition)
2014 Honda Goldwing Valkyrie
These are the most compleat kit at lowest price, they are $70 less than Rivco, I like em.
I also like your idea of not cutting the old bar off and using it to mount more junk.
On the handle bar piece that you add to the " DOG BONE " style just make it One or Both.. slightly longer ...then you can use all sorts off clamp on type devices .................... Mike
These are the most compleat kit at lowest price, they are $70 less than Rivco, I like em.
I also like your idea of not cutting the old bar off and using it to mount more junk.
Yes,there is an"art" to mounting junk....or a sickness The original bar piece is in a perfect location for accessories!
Maybe they have some stocked up. Not being made anymore. Don't know why, seems like a good riser.
David
Could be. I've tried to buy things like this before, only to find out at checkout they didn't really have them. I think the market has dwindled for many GS, RS aftermarket parts, and because they aren't very "universal", they've just quit making them. The only complaint I read about these is that the bolts rust...I replaced them with stainless steel bolts I also removed my BRP 1" riser prior to installation, and just barely had enough slack in cables/wires. But I do like the risers!