-
Active Member
LED Signal lights
I added saddle bags with LED light's in them and now my signal lights blink faster, wonder if there is anything you can add to the wiring to get them back to normal. 2013 STS is the model I have.
-
-
Active Member
This probably won't work on yours but you could try it. If not you'll prolly have to add a resistor.
https://youtu.be/gpuEqpiTm4M
Sent from my iPad using Tapatalk
-
I had a he same trouble led light in bag replaced tail lights with led tail lights from custom dynamics problem solved
-
I had a he same trouble led light in bag replaced tail lights with led tail lights from custom dynamics problem solved you can try resetting hyper flash on lamonster sight
-
Very Active Member
Type resistor in search
I put led's on my mirrors and had to add a 100 ohm 1/2 watt resistor but only on the left side.
2015 RTS Special Series
Russell Day Long seat
F4 Customs windshield
Sena 20s
-
Very Active Member
ST resistor
Originally Posted by Bensonoid
I put led's on my mirrors and had to add a 100 ohm 1/2 watt resistor but only on the left side.
How did you add the resistor. In series or parallel with the leds??
I have an erratic blinking on the left side only of my STS.
-
Very Active Member
In series. I started with 100 ohm and that was enough to fix mine.
2015 RTS Special Series
Russell Day Long seat
F4 Customs windshield
Sena 20s
-
Active Member
-
If it's the trick that I'm thinking about: (The hazard-flasher one...); that's only for 2014 and later bikes.
-
Need to reset flashers
Fpound post on how to reset hyper flash
my 2016 F3T had the problem when Lamonster garage installed the halo flashers on my fog lights. Lamont reset flashers now works ok.
http://www.spyderlovers.com/forums/s...ht=hyper+flash
Last edited by Marker; 03-09-2017 at 09:21 AM.
-
His bike is a 2013, and this procedure won't work...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|