Results 1 to 9 of 9

Thread: 2014 RT SE

  1. #1
    Active Member
    Join Date
    Jun 2012
    Location
    Bowling Green Mo. 63334
    Posts
    81
    Spyder Garage
    0

    Default 2014 RT SE

    I am having a problem with my digital gas gauge. Some times, it works & then the next time you look at it it is all blank. yesterday I riding , it showed 4 bars, about 5 miles later, it was blank, and would not show anything. I stopped and filled with gas, then it was working again. rode about a mile, and it went blank again. went home and parked, tried it again about an hour later, and it worked, today it is not working again. It is not showing any code's. Any one have any ideas for me. Thanks

  2. #2
    Very Active Member ARtraveler's Avatar
    Join Date
    Feb 2010
    Location
    Valley Springs, AR
    Posts
    41,367
    Spyder Garage
    8

    Default

    Quote Originally Posted by modagwood View Post
    I am having a problem with my digital gas gauge. Some times, it works & then the next time you look at it it is all blank. yesterday I riding , it showed 4 bars, about 5 miles later, it was blank, and would not show anything. I stopped and filled with gas, then it was working again. rode about a mile, and it went blank again. went home and parked, tried it again about an hour later, and it worked, today it is not working again. It is not showing any code's. Any one have any ideas for me. Thanks
    How old is your battery--or--loose connections? When electronic glitches start to happen, that is the first place to look.

    Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.

    Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)

    MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles

    IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
    2020 F3L , Magma Red

  3. #3
    Very Active Member Ex-Rocket's Avatar
    Join Date
    Mar 2013
    Location
    Marion, Arkansas
    Posts
    1,785
    Spyder Garage
    0

    Default

    I sounds like to me that the sending unit has gone haywire or could be a loose connection at the sending unit.



    2017 F3 Limited in Intense Red Pearl

    2008 Triumph Rocket (SOLD)

    2002 Honda VTX 1800 C ( SOLD)

    2014 Triumph Thunderbird Commander

  4. #4
    Active Member
    Join Date
    Jun 2012
    Location
    Bowling Green Mo. 63334
    Posts
    81
    Spyder Garage
    0

    Default

    [QUOTE=Ex-Rocket;1231697]I sounds like to me that the sending unit has gone haywire or could be a loose connection at the sending unit


    where is sending unit location?

  5. #5
    Very Active Member Ex-Rocket's Avatar
    Join Date
    Mar 2013
    Location
    Marion, Arkansas
    Posts
    1,785
    Spyder Garage
    0

    Default

    In the gas tank



    2017 F3 Limited in Intense Red Pearl

    2008 Triumph Rocket (SOLD)

    2002 Honda VTX 1800 C ( SOLD)

    2014 Triumph Thunderbird Commander

  6. #6
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default Well....

    Looks like a loose connection or a faulty sending unit. Start with tracing the wires from the top of the fuel tank where the sending unit is located (may vary on the F3 ) making sure that connection is tight. Then check the pins on the plug to the instrument cluster. Shop manual would have some tests for the sending unit for further testing. Hope it's just a loose connection....
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black

  7. #7
    Very Active Member Highwayman2013's Avatar
    Join Date
    Nov 2012
    Location
    North Las Vegas, NV
    Posts
    4,561
    Spyder Garage
    1

    Default

    We had this problem on our 2012 RT and it was the sending unit. It was replaced under BEST warranty.
    2016 F3 Limited
    2019 Ryker Rally
    2014 Suzuki V Strom 650
    2020 CSC TT 250
    2016 F 3 Limited , Vegas White

  8. #8
    Very Active Member gkamer's Avatar
    Join Date
    Jun 2015
    Location
    Ritzville, Wa
    Posts
    2,163
    Spyder Garage
    0

    Default Gauge in wife's car

    The fuel gauge in my wife's car has not worked in a couple of years. I think it's the fuel sending unit on the fuel pump in the gas tank. She's uses the trip meter for a fuel gauge. She fills the tank and sets the trip meter to zero. When it hits 250-300 miles, she refuels. She hasn't run out of gas yet. If the trip meter goes Tango Uniform she is going to have a problem.
    Greg Kamer
    "It's better to be not riding and wishing you were than be riding and wishing you weren't."

    USAF, 20 years, retired
    Sheriff's Office, 23 years, retired



    2018 Can Am Spyder RT-Limited

  9. #9
    Active Member
    Join Date
    Jun 2012
    Location
    Bowling Green Mo. 63334
    Posts
    81
    Spyder Garage
    0

    Default Fuel gauge

    Quote Originally Posted by modagwood View Post
    I am having a problem with my digital gas gauge. Some times, it works & then the next time you look at it it is all blank. yesterday I was riding , it showed 4 bars, about 5 miles later, it was blank, and would not show anything. I stopped and filled with gas, then it was working again. rode about a mile, and it went blank again. went home and parked, tried it again about an hour later, and it worked, today it is not working again. It is not showing any code's. Any one have any ideas for me. Thanks
    Thank you every one for your help, but I did not get it working, no loose connections that I could find I called my dealer at cowtown USA, the tech is thinking a bad sender. going to make an appointment and get in as soon as weather break's and warms up a bit more,120 miles one way. Thank's again Ramond, sorry it took me so long to thank you all for all of your info. I have talked to my dealers' tech, kevin, in cuba missouri at cowtown USA. He is a super good tech and he thinks my problem is the gauge sender also. I am still waiting until the weather gets a bit better before making an appointment Thank you all. Raymond

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •