-
Active Member
My Spyder wish list
Here's my big wish list, in no particular order. I may change the source vendor here or there.
Bell mag 9 Sena, $190, Bell Solid Mag-9 Sena Half Face Motorcycle Helmet - Titanium / X-Large https://www.amazon.com/dp/B00AWRYKXO..._FFqUybTF6V0H6
Laser alignment, squared away
KOTT grill covers?
Fobobikesales. Tpms set of three silver, $150 https://www.tricledusa.com/_p/prd1/4...trailer-option
Fuse box, $90, https://www.tricledusa.com/_p/prd1/3...uze-block-fz-1
Vibration dampener, $190, http://dochumphreys.wixsite.com/road...amper-products
Turn signal lights,$65, http://www.lamonstergarage.com/rt-fu...r-2014-and-up/
Air filter, bajaron, $35
Bajaron spring tightener, $185
Belt tensioner from doc humprey's, $190, http://dochumphreys.wixsite.com/road...amper-products
Tricled rear lights, About $300 for all, https://www.tricledusa.com/_p/prd1/3...ing-(optional)
And
https://www.tricledusa.com/_p/prd1/3...unctioning-led
And
https://www.tricledusa.com/_p/prd1/4...ay-oem-harness
Lamonster led front headlights, $110, http://www.lamonstergarage.com/9005-...for-spyder-rt/
Lamonster fog lights, $43, http://www.lamonstergarage.com/lamon...ed-fog-lights/
F4 windshield: $415, https://f4customs.com/index.php?rout...ice&order=DESC
Mirror? $70, http://store.valueaccessories.net/Ri...potMirror.aspx
Grand total around $2,000! I really wish that my birthday, Christmas and Father's Day was closer, for the next 10 years!
Enjoying it all as is though. Just fun to dream and drool a bit.
Rawhide Kid
2014 Spyder RT Limited. Cognac
Goodyear, AZ
-
-
-
Active Member
Just an observation on the Ridescan mirror. Since it looks to be universal it appears to only mount to the windscreen. On the RT with moving windscreen, this may be a problem if you are always adjusting it? TricLED sells a similar mirror with a bracket that you can mount it to the top of the dash so it would remain fixed independent of the windscreen movement. Don't know if TricLEDs mount may work with the Ridescan or just go with the whole TricLED solution? I've been looking at the TricLED mirror myself but my concern is the top dash mount with the ram mount on the bar is not 'solid' I already have the JT bar and ram up there and used it to hold my phone and it was very shaky. Don't know if a shaky mirror would drive me crazy more than help.
NEW/CURRENT (Wife's Bike, I ride Goldwing/Africa Twin)
2023 RT Limited Petrol Blue Metallic
Working on the upgrades... so far... Show Chrome Isolator Fuse Block, Tackform Adventure Wireless charger phone mount
OLD/TRADED
2015 RT Limited Intense Red Pearl
Farkles: Ultimate Tallboy seat, FOBO, JT Dash Mount, Lamonster Spyder Cuff, Kradellock, TricLED lighting - fenders, A-Arms, saddlebags, run/brake, Custom Dynamics high brake light, brake modulator, Drink2Go passenger, MUTH turn signal mirrors, Bajaron sway bar, Kuryakyn ISO grips, SpyderTV front grilles & rear trunk organizer, homemade trunk light
Pending: Elka shocks, Yokohama S Drive rear tire, EVO 595 front tires, Centramatic balancers, Neutrino black box
-
Very Active Member
-
-
Active Member
Originally Posted by SpyderSteveFL
Just an observation on the Ridescan mirror. Since it looks to be universal it appears to only mount to the windscreen. On the RT with moving windscreen, this may be a problem if you are always adjusting it? TricLED sells a similar mirror with a bracket that you can mount it to the top of the dash so it would remain fixed independent of the windscreen movement. Don't know if TricLEDs mount may work with the Ridescan or just go with the whole TricLED solution? I've been looking at the TricLED mirror myself but my concern is the top dash mount with the ram mount on the bar is not 'solid' I already have the JT bar and ram up there and used it to hold my phone and it was very shaky. Don't know if a shaky mirror would drive me crazy more than help.
Good catch on double counting the belt tensioner!
As for above, I just added the top dash mount for a cup holder. Agree, it seems Shakey to me as well, but we will see. I haven't tried it yet. I had intended to get the mirror that attaches to this dash mount via ram mount, so perhaps I put link to wrong one. I've tried the little "stick on" convex mirrors attached to my side mirrors. While I like them on cars, struggling to like them on the spyder. Too much vibration in the mirror perhaps? Not sure. Perhaps the new magnetic mirror mounts would help. Not sure. Stream of thought here.
Yes, I'll keep dreaming and drooling.
Rawhide Kid
2014 Spyder RT Limited. Cognac
Goodyear, AZ
-
SpyderLovers Sponsor
Squared Away
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Active Member
Originally Posted by cptjam
Ready when you are! 😄😄😄
Put me on your list if you ever come through phoenix!
Rawhide Kid
2014 Spyder RT Limited. Cognac
Goodyear, AZ
-
SpyderLovers Sponsor
Thru Phoenix
We go through often. PM a phone number, and as we get closer to one of our trips, I'll call you! Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Originally Posted by SpyderSteveFL
Just an observation on the Ridescan mirror. Since it looks to be universal it appears to only mount to the windscreen. On the RT with moving windscreen, this may be a problem if you are always adjusting it? TricLED sells a similar mirror with a bracket that you can mount it to the top of the dash so it would remain fixed independent of the windscreen movement. Don't know if TricLEDs mount may work with the Ridescan or just go with the whole TricLED solution? I've been looking at the TricLED mirror myself but my concern is the top dash mount with the ram mount on the bar is not 'solid' I already have the JT bar and ram up there and used it to hold my phone and it was very shaky. Don't know if a shaky mirror would drive me crazy more than help.
Hello, if you are considering 180-degree mirror riderscan , i would suggest using our dash mount bar, and the whole set up from us.
It comes with custom bracket, so it won't be shaky. We mounted the complete setup , it's easily adjusted but no shake
Sent from my iPhone using Tapatalk
-
Originally Posted by Rawhide kid
Good catch on double counting the belt tensioner!
As for above, I just added the top dash mount for a cup holder. Agree, it seems Shakey to me as well, but we will see. I haven't tried it yet. I had intended to get the mirror that attaches to this dash mount via ram mount, so perhaps I put link to wrong one. I've tried the little "stick on" convex mirrors attached to my side mirrors. While I like them on cars, struggling to like them on the spyder. Too much vibration in the mirror perhaps? Not sure. Perhaps the new magnetic mirror mounts would help. Not sure. Stream of thought here.
Yes, I'll keep dreaming and drooling.
Hi Rawhide, saw some of our products on your wish list! Come see us at the booth.. our RT-F3T will be there with all the lights and accessories so you could see it in person. Thanks for considering our products for your Spyder !
Sent from my iPhone using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|