Results 1 to 3 of 3
  1. #1
    Active Member Brogers57's Avatar
    Join Date
    Jun 2013
    Location
    Winchester, KY
    Posts
    391
    Spyder Garage
    0

    Default 2014+ Air Scoops/Vents

    It looks like there are 5 bolts that hold the scoops/vents to the fairing. I'm assuming that the bolts go all the way through, are there caps that fill the holes? Anybody have a close up pic of what it may look like on the outside? Thanks!
    2014 Black RTS SE6
    2012 Black RS - Sold 7/24/2014
    2011 Sonata LTD


  2. #2
    Active Member cbredneck's Avatar
    Join Date
    May 2013
    Location
    leesburg fl, Kent Island Md
    Posts
    117
    Spyder Garage
    0

    Default scoops

    doc holiday has this posted on site
    [SIGPIC][img]https://www.spyderlovers.com/forums/maps/map.prov.png?states=[img]https://www.spyderlovers.com/forums/maps/map.prov.png?states=BC.ABhttps://www.spyderlovers.com/forums/maps/map.prov.png?states

  3. #3
    Active Member
    Join Date
    Sep 2016
    Location
    Albuquerque New Mexico
    Posts
    34
    Spyder Garage
    0

    Default

    there are screws that come through the plastic in to the scoop.
    Makes sure you mark the holes to be drilled then assemble the scoop and screw it on.
    also make sure the front hole that goes in where the deflector was is lined up you will have to put a long screw in there. If that is off all the holes will be off

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •