-
-
Very Active Member
-
-
Very Active Member
Originally Posted by davev1pa
Any word from ur dealer?
Little should get back soon & better details will post as I know.
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Originally Posted by davev1pa
Just got in with check engine light 2012 RT 3400 miles Code P1171 ( #1 lean) Ill check vacuum hose and run seafoam..I've only driven a 100 miles since I got it last week and it was running a lot different until tonight. Like a small miss at low rpm..fine on the highway but ...engine light is annoying. Should i just disconnect the neg battery post to clear once i check over everything?
The 2012s had throttle body problems but I don't know if that would cause the lean error. Have a dealer check your VIN with BRP to see if the TB was replaced on your RT. BRP will have record if it was.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
I just changed my wifes oil in her 2012 RT now its pushing a P2279 and P0106 code ... Never touched the vacuum line yet I guess its time now... wish me luck oh yea bike has almost 4k mikes on it.. thanks for your time and my first post.. take care all
-
Lines look fine but im gonna change them anyway ... no luck at the NAPA store on to Summmit racing now..
-
Active Member
What size is the hose ? Good post and great info.
-
They are the original equipment. the front one was cracked in 2 places the rear seems to be fine. I found some new 3mm ID high temp ones from summit racing. the only hitch is I had to purchase 10 feet of hose.. so if any one needs some just shoot me your address and Ill put some in the mail for ya. I have some pictures but Im not sure if I can post them since I'm a new member... hopefully this fixes the issue and she can get back to riding and I can go fishing...lol
take care all
Don L
-
Ozzie Ozzie Ozzie
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
-
Ok guys, I got the bike back running with the new vacuum lines and she runs great. New problem is the drivers side mirror will not stay on I think the top slotted mount is broken because it will not hook on the stud and then clip on the other 2... What am I looking at manic mirrors ? what is the fix for this..
-
Ozzie Ozzie Ozzie
Sounds like you haven't got Magic Mirror Mounts on that RT, which means it's past time to get them!! Lamonster Garage has them.
They are magnets that replace the pins, & little metal plates that replace the clips & placcy slotted mount/hook thing that has almost certainly broken on your floppy mirror. Easy 15min install, just don't pull the magnets off the roll to play with them until you're ready to install them, and even then, push ONE off the roll, put the roll well clear, & fit that one to the Spyder before moving on to the next! The magnets are Very STRONG (it's very easy to draw blood if skin &/or fingers get between two of them clacking together) and they are also fairly fragile due to the metal used to make them that strong magnetically, so playing with them & letting them clack &/or jump together is not a great idea - if they break, they're useless as mirror mounts!
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Very Active Member
Originally Posted by Dlaport1
Ok guys, I got the bike back running with the new vacuum lines and she runs great. New problem is the drivers side mirror will not stay on I think the top slotted mount is broken because it will not hook on the stud and then clip on the other 2... What am I looking at manic mirrors ? what is the fix for this..
As Peter says, Magic Mirrors is your answer. Don't waste money and time replacing the OEM bits.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|