-
Active Member
TriAX handles bar middle mounting screw help
On the triAx bar is a rubber plug on the top center under the cap is threaded for a mount. Anyone know what the threads are other than metric and bolt size that hole will take. Want to put my GPS there. I saw it on the board at one time but no longer.
THX Gary
-
Very Active Member
Originally Posted by wd8ajj
On the triAx bar is a rubber plug on the top center under the cap is threaded for a mount. Anyone know what the threads are other than metric and bolt size that hole will take. Want to put my GPS there. I saw it on the board at one time but no longer.
THX Gary
6 mm. I think 1.0 pitch.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
IdahoMtnSpyder has it right at 6mm x 1.0. I had just checked the size on mine yesterday to install a Ram Mount ball.
-
Active Member
Thanks for the info. Now to see what length I need. Mouting a Ram Ball so I can put my GPS on it. Offto the hardware store when It stops raining...
-
In case you didn't know, Ram Mount makes a ball with a 6mm x 1.0 stud.
H2O
-
Very Active Member
Originally Posted by H2O
In case you didn't know, Ram Mount makes a ball with a 6mm x 1.0 stud.
H2O
Yes they do..... Here is the info.
http://www.rammount.com/part/RAP-B-379U-M616
Bob
2011 RT-S SM5 - Black
Bought June 2013 with 450 miles. 27K on 8-1-2017.
Farkles - DIY Trunk Break Light, HMT Break Light, DIY Mirror Turn Signal Lights, DIY Bluetooth Dongle, DIY iPod Setup, DIY Alarm System Install, Show Chrome front fender / rear saddle bag lights, 4th break light around the trunk, Vented Windshield, Baja Ron Sway Bar, DIY GPS setup, Smooth Spyder, BRP Chrome Mirrors, Adjustable deflectors, Triaxis handlebars, NVB Pegs, Bad Boy Airhorn... More to come
-
Active Member
Originally Posted by finless
Any pics of this installed around?
Andy S. a.k.a. SpyderRT
2014 Black RT-S with SE6, Tri-Axis handlebars, Rear Trunk liner and shelf, Travel Cover, Heated Comfort seat, Driver Backrest, Akrapovic Silencer, 25 inch Adjustable Vent windshield, Adjustable Side Wind deflectors. BajaRon Swaybar and links. KOTT grills.
-
Active Member
OH well, Have the ball need screw but looks like a 6 or 7Mmm will work. If I cant find one, at least i have the link for the RAM page with one I can order.
Now all registered for Spyderfest and have hotel room. Just have to wait......
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|